Carrier lifetime is one of the most sensitive parameters to defects in material. On the other hand, carrier lifetime is the main parameter which determines the dynamic characteristics of semiconductor devices. Therefore, control of carrier lifetime in differently doped and under various carrier injection conditions are widely used as a technological procedure within modifications of power rectifiers designed for operation in the range of high frequencies. Complementarily, carrier lifetime reduction is the limiting factor in functioning of high energy particle detectors. In this work, the comprehensive techniques and instrumentation have been developed for contact-less control of carrier lifetime in substrate materials and in device structures covering wide range of the excess carrier densities from 1011 to 1019 cm-3 by combining various techniques and by implementing specific measurements regimes.
The measurement techniques based on free carrier absorption transients have been combined. The pulsed excited photoconductivity transients probed by 10 and 22 GHz microwaves have been employed to carry out the carrier lifetime measurements at low injection densities. The instrument for planar and cross-sectional mapping of recombination lifetime distribution has been developed. An additional to pulsed 0.5 – 5 ns excitation at 1.06 μm wavelength the steady-state spectrally varied bias illumination has been applied to separate carrier trapping and photoconductivity quenching effects. These regimes combined with temperature scans of carrier lifetime variations comprise the spectroscopic instrumentation for technological control of recombination centres in material. The photoconductivity transients probed by continuous wave infrared light in the range of 1.55 – 2.6 μm served as a tool for carrier lifetime measurements in the range of high excitation densities. The instrument for simultaneous control of carrier lifetime at low and high excitation conditions has been designed and fabricated for express control of dominant recombination deep levels by using the satellite samples of the same material.
The specific recombination lifetime variations obtained in Si, Ge and GaAs materials will be illustrated. The modifications of the instrument for in situ carrier lifetime control in Si within harsh environment of irradiation chamber during exposure under 2- 9 MeV protons will be discussed.