Breakthrough in application of solid-state lighting sources offers considerable power savings. Narrow-band light-emitting diodes (LEDs) are widely used in automotive signage, traffic lighting LCD backlighting, and full-colour video displays. However, Joule heat released in the cladding and active layers of LEDs may noticeably affect the output flux and move the chromaticity out of the ranges determined by signage and display standards. This effect is especially important in the conditions when the average driving current is varied. The output and chromaticity drifts can be minimized by the selection of optimal methods of LED driving. A common method of driving LEDs is application of rectangular pulses with a variable duty cycle and a constant forward current. In this case, LED output is controlled by the duration and frequency of the pulses. Usually, pulse width modulation at a constant repetition frequency (PWM) is used [1]. Another method of controlling LED output is frequency modulation (FM) at a constant width of the pulses.
In this work, thermal and spectral characteristics of LEDs driven in the PWM and FM modes were investigated and compared. High-power, red (AlInGaP), amber (AlInGaP), and blue (InGaN) LEDs were studied. In order to estimate the temperature of the LED chip, a forward-voltage method was applied and the dominant wavelength and chromaticity coordinates of the LEDs were found from electroluminescence spectra. All measurements were performed within a cryostat/oven in order to stabilize the temperature of the LED mounting pad. The analysis of the experimental results revealed a difference in dominant wavelength for PWM and FM driving methods. Different average temperatures were revealed during the current pulse for the two driving methods. Meanwhile, the average temperature during whole period was the same. Significant changes in spectral characteristics and chromaticity coordinates were determined for amber AlInGaP LED. This phenomenon can be explained by the sensitivity of emission properties of high-aluminium-content AlGaInP alloy to temperature.