When exposing a photopolymer by a tightly focused laser beam two-photon absorption is induced and ultra-localized polymerization reaction is initiated. By pin-point scanning the trace of virtually designed object features of desirable architecture can be materialized. After rinsing in a solvent only the exposed part of material is left and in this way 3D microobjects are produced [1, 2]. Recently, self-polymerization of fiber-like features has been reported [3]. Such nano-features form in-between rigid polymeric supports when the distance between them is smaller than critical ($D_{cr}$ < 1 μm) [4, 5]. In this paper, results of self-polymerization of nano-fibers (diameter < 100 nm) and nano-membranes (thickness ~ 100 nm) in acrylate based photopolymers AKRE37, PEG-DA and SCR500 are presented. By femtosecond laser (80 fs, 800 nm, 80 MHz) beam radicals are generated in-between the fabricated "X" walls when writing parallel lines at light intensity close to polymerization threshold. The conditions (average laser power $P$ and period of laser written lines $L$) required for self-polymerized features (nano-fibers and nano-membranes) to form in a certain photopolymer are experimentally obtained. A model describing self-polymerization conditions including the influence of laser beam intensity $I$, radical concentration $C$, feature rigidity $F$ and critical distance $D_{cr}$ between the supports is proposed [6].
FEMTOSECOND PULSES INDUCED SELF-POLYMERIZATION AT NANO-SCALE
G. Bičkauskaitė1, M. Malinauskas1
1 Vilnius University, Physics Faculty, Department of Quantum Electronics, Laser Research Center, Saulėtekio ave. 10, LT-10223 Vilnius, Lithuania
[1] H. -B. Sun and S. Kawata, Adv. Polym. Sci. 170, 169-273 (2004).
[2] M. Malinauskas, H. Gilbergs et al., Proc. of SPIE 7366, 736622 (2009).
[3] H. -B. Sun, A. Nakamura et al., Adv. Mater. 23, 2011-2014 (2003).
[4] S. -H. Park, T. -W. Lim et al., Appl. Phys. Lett. 89, 173133 (2006).
[5] D. Tan, Y. Li et al., Appl. Phys. Lett. 90, 071106 (2007).
[6] M. Malinauskas, G. Bičkauskaitė, M. Rutkauskas, D. Paipulas, V. Purlys and R. Gadonas, Lithuanian J. Phys. (to be printed 2010).