In our days, demand for energy saving technologies is constantly growing. Around 20% of world's total electrical power is used for lighting purposes. The growth of new semiconductor lighting technologies enables increase of the effectiveness twice and save up to 10% of total electrical power. There are two competing solid state lighting technologies: based on inorganic semiconductors and organic materials (organic light emitting diodes - OLED). In comparison with “classical” LEDs, OLEDs have several advantages: OLED technology can be used for the large area device, flexible devices, materials and technology for making OLED's are potentially cheaper and devices could be easily recycled. One of the main problems in OLEDs structures is degradation of performance due to the oxidation, which is present in all organic materials. Therefore, time consuming degradation experiments gives essential information on the properties of OLEDs. The aim of this work was development of the two channels device for the automated degradation tests.
Two channels of the device allow direct comparison of the two different structures at the same conditions (moisture, temperature, radiation). Device can operate in three different regimes: constant voltage, constant current and constant light intensity. For the easier sample comparison, both channels of the device are working in the same measurement regime, with the same static parameter. Compact and stand alone device could be used in the glovebox system directly after the end of OLED fabrication. Experimental data is stored in the internal memory of the device, which can be read through the USB interface. The main parameters of the device: maximal voltage – 20 V, maximal current – 50 mA, resolution 12 bits, more than 100000 data points.