Here it is represented an optical and electrical investigation of the LED lamps and statistical data handling. Optical parameters were measured using multi-channel spectrometer (Hamamatsu C7473) and integration sphere (Sphereoptics) where the light was collected and smoothed. The electrical characteristics of MR16 cap (12 V DC) lamps were measured by power source Keithley 2430. The experimental setup was calibrated by specified spectral distribution calibration lamp (Bentham CL2). Our research objects were LED lamps of red, yellow, green, blue and white light colors with three types of connection caps (GU10, MR16 and E27).

Wall-plug efficiency of the LED lamps is determined by four efficiency components: intrinsic LED characteristics, power supply electronics, optics and heat management. In this stage of research only the total optical flux and wall-plug efficiency of the lamps were measured without a consideration of separate components. Statistical analysis was based on measurement results form several units of the same type LED lamps. Standard deviation of optical and electrical parameters was calculated for representation of the trustiness and quality of production. It was shown that 3% of the production were damaged during the manufacturing process and are not suitable for exploitation. According to the results, we conclude that a manufacturer uses insufficient quality control procedures, which must be improved in order to prevent the reject and parameter scattering of the production.