LEDs clusters based on red, green and blue (RGB) LEDs are widely using in full-colour video displays and general lighting. Adding phosphor conversion amber LED to RGB cluster makes trading off between colour rendition characteristics possible [1]. LED operation based on injection electroluminescence which defines unbalanced carrier radiative recombination [2]. Density of states and carrier distribution are depended on temperature so LED spectral power distribution (SPD) varies. Respectively, cluster output characteristics depend on temperature.
In this work, separate LEDs spectral and thermal characteristics were investigated before modelling white light clusters at 3500 K, 4500 K and 6500 K colour temperatures. AlGaInP red, phosphor conversion InGaN amber, InGaN green and blue LEDs were used. All measurements were performed within cryostat/oven in order to stabilize the temperature of the LED mounting pad. Temperature range was set between 273 K and 333 K with 10 K step. SPD were measured using integration sphere and multichannel spectrometer. There types of LEDs clusters were modelled: RGB, RAGB and AGB, which characterized by the highest colour saturation, fidelity and dulling index respectively. RAGB cluster is linear combination of RGB and AGB clusters with 0.24 weigh coefficient.
Results shows that AGB cluster chromaticity coordinates in the widest LEDs mounting pad temperatures are in three-step MacAdam ellipse area which limits unnoticed distortion of the colour by over 99% of individuals with normal vision. RGB cluster at high mounting pad temperatures (323 K and 333 K) can not be defined as white light source considering American National Standard for electric lamps (ANSI_ANSLG C78.733 - 2008). RGB cluster at low pad temperatures (273 K) can be described as lower colour temperature white light source. RAGB cluster only at 333 K pad temperature are not described as white light source. The highest chromaticity shift for RGB cluster can be explained by AlGaInP red LED radiant flux the highest decrease. AGB cluster are the most stable at all pad temperatures independent of colour temperatures. This is influenced by the same radiant flux decrease of amber, green and blue LEDs.