The single, double, triple and bulk heterostructure organic material layers were vacuum deposited or spin coated onto by ITO covered glass and their electrical, photoelectrical and electroluminescence (EL) features were investigated.
Mobility of charge carriers of materials V-417 and C60 were measured using photo generated charge extraction by linearly increasing voltage method (photo-CELIV). The mobility of electrons in C60 layer was of the order of 5·10-6 cm2/V·s, while the mobility of holes of V-417 layer was approximately 5·10-7 cm2/V·s. Obtained results demonstrated that C60 is suitable electron transport material, and V-417 may be used as emission as well as hole transport material while depositing organic light emitting diode of bulk heterostructure.
The family of Volt-Ampere Characteristic (VACh) of organic material layers was measured in the dark and in the light. It is demonstrated that PEDOT: PSS sub layer upgrades injection of holes from indium tin oxide (ITO) into V-417 emission layer and into V-417+C60 bulk heterostructure.
The EL of single V-417 layer was observed at 30 V threshold voltage while the EL of double PEDOT: PSS/V-417 layer was observed at 20 V threshold voltage. There was no EL of deposited organic light emitting diode of bulk heterostructure, while after annealing for 1 h at 120°C in nitrogen atmosphere EL was observed at 22 V threshold voltage.