Gallium nitride (GaN) and related alloys have been the subject of extensive research because of their application in blue laser, LED's, high power and high frequency electronics [1]. Usually GaN epitaxial layers are grown on a sapphire substrate which results in a poor matching of lattice parameters and gives a high density of threading dislocations (108-1010 cm-2) which is usually not acceptable for applications mentioned before [2].
This work is devoted for determination of threading dislocation density in GaN films using wet etching and scanning electron microscopy (SEM) and atomic force microscopy (AFM) microscopy. Usually you cannot detect dislocations on a raw sample therefore etching technique is used to etch pits around dislocation making them more visible for microscopy analysis.
2-3 μm-thick GaN epitaxial layers were grown on sapphire substrate using metal-organic chemical vapor deposition (MOCVD) reactor at the Institute of Applied Research, Vilnius University. For etching experiments a hot phosphoric acid (H3PO4) (85%) was used together with a digital hot plate to maintain acid's temperature which was varied in this range 160 – 200 °C. The etching duration was changed from 8 min. to 20 min.
Etched films will be analyzed using SEM and AFM microscopy to determine threading dislocation density, and to identify the best etching conditions for revealing the dislocations. Later determination of dislocation density in GaN will be used to optimize conditions of MOCVD growth.