Granular metal-dielectric nanocomposites have become quite attractive materials to develop spintronic devices (magnetic sensors, high frequency nano-oscillators, spintronic transistors, magnetic storage devices etc.) because of their unusual physical properties. The advantage of such nanocomposite materials that contain soft ferromagnetic nanogranules coated with dielectric matrix is related to the appropriate properties combination, such as high saturation magnetization MS (≈ 200 emu/g), low coercive force Hc (less than 100 Oe), high electrical resistivity $\rho$ and high negative magnetoresistance ($MR=\Delta\rho/\rho=(\rho(H)-\rho_0)/\rho_0\sim5 \%$ ). It has been shown experimentally that physical properties of granular films depend on chemical composition of nanogranules and matrix, the shape and size of nanogranules, their structural order and possible surface oxidation, thickness of insulator layers and state of the interface between nanogranules and matrix. In this work we present a study of the magnetic and magnetotransport properties of granular (FeCoZr)x(Al2O3)1-x (35 at. % ≤ x ≤ 64 at. %) thin films with respect to their structure. Two kinds of samples were synthesized by ion-beam sputtering in pure Ar (Ar series) or mixed Ar + O2 (Ar + O2 series) atmosphere. The electron transport in such nanocomposites proceeds by intergranular tunneling when the concentration of metallic granules is below the percolation threshold (~ 52% for films of Ar series). Granular fims of Ar+O series do not reveal percolation (formation of metallic current-conductive cluster) even at metallic contribution as high as 64%.
Complementary study of the magnetic structure characteristic of (FeCoZr)x(Al2O3)100-x covering different concentrations of metallic phase was performed using combination of atomic-force (AFM)-magnetic force microscopy (MFM) method. MFM topography images of the films of Ar and Ar+O2 series with three studied compositions (FeCoZr)33(Al2O3)67, (FeCoZr)45(Al2O3)55 and (FeCoZr)64(Al2O3)36 differ greatly. For the films of Ar series MFM study of x=33 at.% composition showed no magnetic interactions between the isolated nanoparticles, for x=45 at.% the labyrinth-like structure of ferromagnetically interacting nanoparticles and for x=36 at.% it was shown the stripe-like structure that confirmed the formation of magnetically ordered net of the metallic granules. The study of MFM images of Ar +O2 films series showed no evidence to ferromagnetic interaction between nanoganules and that proves the oxidation of FeCoZr nanoparticles during the fabrication of nanocomposite films.
This conclusion is strongly confirmed with direct observation of metallic core-oxide shell structure with transmision electron microscopy. The same should be deduced basing on the field dependencies of magnetization M(H) as a function of temperature (50-300 K) for three studied compositions from Ar series (x=42,47,50 at.%) and Ar +O2 series (x=35, 55, 59 at.%). For all studied compositions of Ar +O2 series FeCoZr granules should rather be considered as non-interacting and superparamagnetic (SP). This is evidenced from their unsaturated state as at T = 300 K as at quite low temperature (50 K) and from close to zero coercive force. For Ar series M(H) of film (FeCoZr)42(Al2O3)58 at T = 300 K showed no ferromagnetic interaction between matellic nanogranules that should be assigned to their SP state. Granular films of (FeCoZr)47(Al2O3)53 composition revealed similar M(H) behavior, while (FeCoZr)50(Al2O3)50 film evidenced partial magnetic interaction between FeCoZr granules. The magnetization curves of nanoparticles in SP state can be analyzed within the framework of the Langeven theory of paramagnetism. For nanogranules of Ar + O2 series and neglecting their metal core-oxide shell structure their medium diameters <D> could be roughly estimated by of Langevin approximation of M(H) curves as 2.9 nm for the composition x=36 at.%, 5.6 nm for x=55 at.%, 6.2 nm for x=61 at.%. For granular films of Ar series the same tendency of <D> growth with metal concentration has been observed, particularly <D>=6.2 nm for x=42 at.%, <D>=11.4 nm for x=47 at.%. This tendency in a good agreement with MFM data that detected the increasing of magnetic contribution with metal concentration growth in studied films.
MR of nanocomposite films from both Ar and Ar+O2 series were investigated with different FeCoZr concentration (x=42,47,50 at.% for Ar series) and (x=35, 55, 61 at.% for Ar+O2). Concentration dependency of MR at Hmax ≈ 3 kOe revealed twice higher effect for oxidized film as compared to non-oxidized one. It should to mention that oxidized films have much higher magnetic sensitivity S (S is equal to variation of MR when magnetic field H is changed on 10 kOe) and much higher resistivity. Obtained absolute values of negative MR effect at higher magnetic field (Hmax ≈ 80 kOe), values of resistivity and magnetic sensitivity for oxidized and non-oxidized granular films as a function of metallic contribution are summarized in the Table 1. This evidences that incorporation of chemically active impurities like oxygen during preparation procedure of the FeCoZr-Al2O3 has a great approach for tuning it's magnetic and magnetotransport properties.
| Non-oxidized | Oxidized | ||||||
|---|---|---|---|---|---|---|---|
| Composition, x % | MR,% | ρ, mOhm·m | S, 1/Oe | Composition, x % | MR,% | ρ, mOhm·m | S, 1/Oe |
| 42 | 3 | 1,20 | 2.4 | 35 | 5,5 | 540 | 1,3 |
| 47 | 0,8 | 0,16 | 0,5 | 55 | 6,3 | 3,16 | 4,2 |
| 50 | 0,5 | 0,08 | 0,2 | 61 | 5,4 | 4,6 | 3.2 |