FLUENCE DEPENDENT CAPACITANCE-VOLTAGE AND CURRENT-VOLTAGE CHARACTERISTICS IN NEUTRON IRRADIATED Si PARTICLE DETECTORS

R. Dvaranauskas1, T. Čeponis1, E. Gaubas1

1 Institute of Applied Research, Vilnius University, Sauletekio Ave. 9-III, LT-10222 Vilnius, Lithuania

Future high energy physics experiments such as experiments at CERN will use silicon detectors for fast and high precision tracking of particles. The high hadron fluences in these experiments cause a crucial damage of the material of detectors. The radiation defect attributed energy levels are introduced in the bandgap of Si thus changing the electrical properties such as leakage current, full depletion voltage ($V_{fd}$) and charge collection efficiency (CCE). Enhanced leakage currents are observed after irradiation, and this leads to the higher electronic noise and reduction of spatial resolution of particle detectors. $V_{fd}$ increases after irradiation and eventually reaches values beyond the stable range of diode operation. I-V and C-V measurement is a standard tool to characterize the steady-state properties of silicon detectors which provides information on the quality of diode, on amount of leakage current and on depletion voltage, stability and breakdown characteristics.

In this work, the combined analysis of the capacitance-voltage and current-voltage characteristics has been performed on CERN standard Si pad-detectors irradiated by reactor neutrons. The rectification properties of diodes are clearly observed for detectors irradiated with small fluences, while symmetrization of I-V characteristics occurs in heavily neutron irradiated detectors. These observations correlate rather well with C-V characteristics measured on the same detectors, when crucial deviations between conductance and impedance C-V characteristics give rise with enhancement of neutron irradiation fluence. The unveiled effects are explained by the increased role of the carrier capture/generation processes within depleted base regions of a diode. It has been confirmed that the impact of carrier generation/capture currents can be reduced by shifting the measurement regimes towards the high frequency range.