RUBITHERM PX [1] is an innovational material mainly used in thermal energy storage applications due to its heat storage properties. RUBITHERM PX powder has a mechanically stable structure – a hydrophilic silica powder as matrix material. It contains up to 60% paraffin as phase change material (PCM) in a polymer structure [2]. The melting point of the investigated material is approximately 21 °C.
The purpose of the study is to investigate if there is any kind of anomaly in the dielectric permittivity and capacity, as these parameters usually show fundamental changes in the material's structure.
In the present study samples were made in shape of 7,84 mm diameter brass cylinders using a Teflon tube as part of powder sample holder. The powder was placed between the cylindrical metal contacts, forming the capacitor for material investigation. Dielectric measurements were performed at temperatures 250 – 310 K and in the frequency range 100 Hz – 1 MHz. The capacity of samples was measured using LCR-meter HP4284 at a rate of 1 K/min during cooling and heating. Temperature was measured using Type-T thermocouple and Keithley Integra 2700 multimeter.

Figure 1 shows capacitance changes when cooled and heated. Two curves for the cooling – heating cycle clearly indicate presence of the hysteresis of approximately 7 K near the RUBITHERM PX 21 melting point. However, the depth of dielectric anomaly is only about 3%, thus no parameters related to the phase transition and related dielectric dispersion can be determined. Variations in wider temperature region revealed upper temperature stability limit of the material to be 370 K.