Power thyristors operate at very high voltages with flowing large currents. Such devices are attractive for power distribution networks to reduce the total number of devices required in a high-voltage DC (HVDC) station and for other applications [1]. Materials in fabrication of these devices should be very pure to avoid breakdown of junctions and to reduce leakage currents. However, imperfections of materials due to technologically introduced impurities and other defects are inevitable.
In this work, investigations of deep traps were performed to identify the defects in thyristor structures and to find out the optimal parameters for annealing of these technological defects. These investigations were implemented by combining the deep level transient spectroscopy (DLTS), the small test signal capacitance - voltage (C-V) [2] as well as the pulsed barrier evaluation by linearly increasing voltage [3] techniques.
A set of investigated thyristor samples contained the industrially fabricated, at enterprise "Vilniaus Ventos Puslaidininkiai", pnp Si structures taken from a technological route and the terminated devices Spectra of defect levels in thyristor structure samples have been examined by using a commercial DLS-82E spectrometer. Measurements of C-V characteristics have been performed by employing high precision QuadTech 7600 LRC meter. BELIV transients were measured by VU assembled instrument. The samples were annealed isothermally at the ~400 °C.
It has been revealed that both the DLTS spectra and the C-V characteristics are significantly modified by deep traps located within base region of the thyristor structures. The asymmetric C-V characteristics have been obtained in the as-fabricated samples, indicating the presence of high density traps. A time scale of the electrical activity of these traps was clearly resolved by analyzing variations of the BELIV transients. It has been determined that density of rather shallow traps can be reduced by isothermal anneals within moderate temperature (~400 °C) range.