PLASMA SYNTHESIS OF TERNARY METAL OXIDE SYSTEMS

Algirdas Norkūnas1, Artūras Žalga1

1 Department of Applied Chemistry, Faculty of Chemistry, Vilnius University, Naugarduko Str. 24, 03225 Vilnius, Lithuania

Aluminium molybdate and tungstate are the representative of the class of the $Me_2(MoO_4)_3$ compounds, where Me=Y, Sc, In, Al, as well as the rare earth elements from Ho to Lu and $M=Mo^{6+}$ or $W^{6+}$ with orthorhombic structure of the $Sc_2(WO_4)_3$ type (space group Pnca). Because of their high charge, trivalent ions should, however, have strong interactions with surrounding anions and thus they are generally considered to be immobile species in solid ion conductors. The study of $Sc_2W_3O_{12}$-type negative thermal expansion (NTE) material has gained considerable impetus recently due to its potential application in a large range of fields and $Al_2W_2MoO_{12}$ is one of the most intensely studied members. It can not only be used as a NTE material, acting as a filler in making composite to control the bulk thermal expansion coefficient, but also can be used as zero thermal expansion material which is desirable in optics, electronics and other fields, where exact positioning of parts is crucial. Moreover, the $Sc_2W_3O_{12}$-type NTE material attracts an extensive interest because of its thermodynamic stability and great chemical flexibility. [1].

Production of high quality ceramic powders for high technology ceramics is becoming one of the most urgent issues in the ceramic industries. In particular, the development of fine ceramic powders with unusual and superior properties is important and has a great interest between many scientists [2]. The technology of optical ceramics includes three main stages: fabrication of nanopowders; preparing of highly dense compacts and sintering of the compact to the non-porous ceramics. Many investigations show, that to fabricate transparent ceramics ultrafine, monosized low-agglomerated nanopowders with high sintering activity have to be preliminary obtained [3].

In this communication we report a thermal plasma preparation technique supported by the tartaric acid assisted aqueous solution of aluminum (III) nitrate, ammonium molybdate (VI) and/or ammonium tungstate (VI) for the synthesis of Al2(Mo1-xWxO4)3 (x=0, 0.5 and 1) ternary system. The thermal decomposition, crystal structure and surface morphology of the as-prepared oxides obtained after both plasma treatment and additional sintering at 400, 500, 600, 700, 800 and 900 °C temperatures were investigated by thermal analysis (TG/DSC), X-ray diffraction (XRD), and scanning electron microscopy (SEM). According to the thermogravimetric analysis the stability of Al2Mo3O12 and Al2W3O12 crystal phases over 800 °C has decreased by the partial decomposition of the as-formed ternary oxides and thereafter by the sublimation of MoO3 and WO3, respectively. Besides, it is important to note that the thermal decomposition of the as-prepared AlMo1.5W1.5O12 compound after plasma treatment completely differs comparing with the above described thermogravimetric behavior of the ternary systems. In this case, by increasing of temperature from 700 to 1,000 °C, no mass losses in the TG curve have observed. The structure and the size of the resulted products have shown clear defined dependence from the temperature. These obtained results were consistent with the conclusions made from TG–DSC analysis of Al–Mo–W–O precursors, which showed well-expressed ending temperature of mass loss and suggested possible crystallization point of final material with initial composition of Al2Mo3O4 and Al2W3O12 phases.


[1] G. F. Xu, Q. Q. Liu, J. Yang, X. J. Sun, X. N. Cheng, Study on the synthesis of Al2W2MoO12 by a simple stearic acid route and its negative thermal expansion property, Ceramics International 35, 3131-3134 (2009).

[2] P.C. Kong, Y.C. Lau, Plasma synthesis of ceramic powders, Pure Applied Chemistry 62, 1809-1816 (1990).

[3] V. Nikolov, I. Koseva, R. Stoyanova, E. Zhecheva, Conditions for preparation of nanosized Al2(WO4)3, Journal of Alloys and Compounds 505, 443–449 (2010).