APPLICATION OF DIELECTROPHORESIS FOR MAKING GERMANIUM NANOWIRE ARRAYS

Jelena Kosmaca1, Jana Andzane1, Gunta Kunakova1, Gvido Petersons1, Justin D. Holmes2, Donats Erts

1 University of Latvia, Institute of Chemical Physics

2 Department of Chemistry, National University Ireland, Cork, Ireland

Dielectrophoresis is polarization of particles suspended in dielectric media placed in the non-uniform electric field. Polarization of the particles causes their motion. This effect can be used for controlled particle transport. In recent years dielectrophoresis has been used for arranging various nanostructures.

Here we present application of dielectrophoresis for aligning germanium nanowires in arrays on an electrode side. Germanium nanowires have been produced with chemical vapor deposition method. We choose hexane as media for germanium nanowires dielectrophoresis. For performing dielectophoresis we apply AC voltage to gold electrodes on Si/SiO2 chip then drop a hexane-nanowire solution onto the electrodes. The nanowires from the media tend to attract to electrodes. After removing the media nanowires stay on the electrode. The surface of the electrodes is observed in a scanning electrone microscope (Fig.1a). From the SEM images we investigate characteristics of more than 400 individual germanium nanowire positioning (Fig.1b-d).

Figure 1
Fig. 1. a) Germanium nanowires attracted to the electrode; b)Measuring angle $β$ that shows the angular position of the nanowire in relation to electrode edge; c)Measuring length of the nanowire that lies apart the electrode; d) Measuring distance between two individual nanowires.

We have done number of experiments to investigate germanium nanowire behavior in dielectrophoresis process by changing electric field frequency in range of 200Hz to 2MHz. Accordingly to the results of our experiments we discuss optimal dielectrophoresis parameters for making germanium nanowire arrays.