Nowadays, one of the important materials is often used in engineering, aerospace and other industries is epoxy resin which has highly competitive physical properties. Currently, new properties and improves of epoxy resins might be achieved by using different fillers where the most promising are carbon based nanofillers. Because of carbon nanotubes (CNT) and graphene nanoplatelets (GNP) exceptional characteristics they are considered as effective carbon nanofillers which would be capable to improve stiffness, conductivity, resistance to environmental conditions, etc. However, it is hard to predict theoretically particle behavior on NC properties. Therefore, physical properties of NC filled with carbon particles in different filler content should be experimentally investigated in order 1) to understand the mechanism how nanofillers impact the epoxy resin nanocomposite (NC) and 2) to determine the optimal CNT or GNP content which would maximally improve physical properties of NC, reduce production costs, and enhance multifunctionality and application possibilities.
The aim of the study is to investigate the impact of two different type carbon nanofillers on the density, rheological and mechanical behavior of epoxy resin.
To pursuit this objective, as a matrix were used mono-component thermosetting epoxy resin RTM6 employed in the aerospace industry. High aspect ratio carbon nanofillers, namely, CNT (1D) and GNP (2D) have been loaded into the hosting matrix by using a high-shear mixer at various weight contents, below and above the nominal percolation threshold.
In order to understand how carbon nanoparticles change the density of investigated nanocomposites hydrostatical weighting were performed. Results show quite insignificant but linear density increase with increasing the particle loading.
Rheological investigations showed that the nanocomposites' viscosity depends on nanofiller type and content. It is obtained that above critical filler content, the effect of nanoparticles on the neat resin viscosity abruptly change acting not longer as viscosity reducers. This critical content could be suitably regarded as a 'rheological percolation' behavior. Results reveal that above percolation threshold, CNT/epoxy nanocomposite are characterized by high viscosity due to the presence of a formed fully connected physical network among CNTs which will be broken up by increasing the shear rate. GNP suspensions, conversely, clearly show the effect of formation of a stable network over the whole considered shear rate sweep. At sub-percolation concentrations, the rheometric frequency sweep tests revealed, that both typology of nanoparticles act as viscosity reducer for the hosting system. To summarize the main found effect it can be stated that above percolation threshold CNT create a strong physical network which is destroyed by high shear rates, on the other hand GNP form weaker but stable network.
The quasistatic tensile tests were applied in order to determine mechanical properties of the NC. Both fillers increase elastic modulus by almost 10% at filler content below percolation threshold in comparison with neat epoxy resin. Results does not show significant improvement of tensile strength.
It is expected, that one of the most promising solutions is an attempt combining these two carbon fillers into a hybrid structure which could lead to a potentially new multifunctional material in research and application as the result of synergy effect of both fillers. It is considered that such hybrid NC besides high mechanical characteristics will provide electrical conductivity and thermal dissipation at lower filler content, that will minimize agglomeration ability and price of the NC.