HALL AND MAGNETORESISTIVITY MEASUREMENTS IN FAST ELECTRON IRRADIATED SILICON

V. Rumbauskas1, A. Mekys1, J. V. Vaitkus1

1 Vilnius university, Institute of Applied Reserch, Saulėtekio av. 9, Vilnius, Lithuania

A set of silicon samples have been irradiated by 6 MeV electrons with doses from 1 to 5 (x 1016) e/cm2. The influence of irradiation to electrical parameters has been tested by Hall and magnetoresistivity measurement techniques. Both measurements revealed carrier mobility of different values, which were attributed to different physical processes of the carrier transport.

Hall and magnetoresistivity effects come in parallel as valuable for carrier transport characterization. In principal the both methods reveal carrier mobility directly and including conductivity measurements the carrier density may be found. The main disadvantage of these techniques is the lack of knowledge of such called Hall and magnetoresistivity factors [1], which introduce discrepancy. Also the geometry of the sample under investigation is very important because it introduces another discrepancy as well. Another crucial parameter for these methods is the homogeneity of the material. And here is the main difference between the mentioned methods as they are differently sensitive to the less controllable parameter—homogeneity. It was already shown how the irradiation with fast neutrons changes Hall and magnetoresistivity effects in silicon [2-3]. There the Hall mobility lowers significantly with the dose because the irradiation created large clusters of the point defects, which simply screen the Hall voltage at the contacts. At the same measurement the magnetoresistant mobility changes only slightly with the dose because the magnetoresistivity effect is proportional not to the absolute value of the resistivity but to its relative change in the presence of magnetic field. This enables with the help of the magnetoresistant effect to extract information from the conductive parts of the material, which is less affected by the irradiation and a kind of average information is extracted about the same material with the help of Hall effect. In this work we apply the both mentioned measurement techniques simultaneously for the silicon samples irradiated by fast electrons (6MeV) to show the difference of the measurements revealed characteristics and discuss the ability for further application.


[1] P. Blood, J.W. Orton, The Electrical Characterization of semiconductors: Majority Carriers and Electron States, Philips Reserch Labaratories, Redhill, Surrey RH15HA, UK, (1992).

[2] R. H. Bube, Investigation of hall and photo-hall effects in inhomogeneous materials, Appl. Phys. Lett. 13, 136 (1968).

[3] A. Medeišis, J. Visackas, Determination of the physical parameters of polycrystalline materials from Hall and Seebeck effects., Lith. J. Phys. 15, 260-264 (1975).