DIAMOND SYNTHESIS USING PLASMA CHEMICAL VAPOUR DEPOSITION METHOD ON DIFFERENT SUBSTRATE MATERIALS

Eriks Elksnis1, Atis Skudra2, Arturs Viksna1

1 Faculty of Chemistry, University of Latvia

2 Institute of Atomic Physics and Spectroscopy, University of Latvia

Our work is concerned with the preparation, investigation and optimisation of low pressure DC plasma chemical vapour deposition systems for diamond synthesis on different substrate materials. A variety of chemical vapour deposition (CVD) methods have been developed over the last years to obtain layer of diamond at low pressure. These methods have led to many applications taking advantage of the exceptional properties of a diamond. However, their properties have to be improved and operational costs reduced.

In this work we used low power (60W and 120W) DC plasma discharge systems in order to deposit rare modification of nanostructural „cauliflower-like", triangulary faceted and cubic high-quality diamond films and polycristaline particles from hydrocarbon–hydrogen gas mixtures at low pressure on tungsten, molybdenum and nickel substrates. (Fig. 1a., 1b., 1c.).

Figure 1a
Fig. 1a. Image of our „cauliflower-like" diamond coating on tungsten
Figure 1b
Fig. 1b. Image of our „cubic" diamond polycristaline particle on molybdenum
Figure 1c
Fig. 1c. Image of our „triangulary faceted" diamond coating on nickel

Discharge was operated for 40 - 100 hours, during whom diamond synthesis products on substrate were made. Analysis of tungsten, molybdenum and nickel substrate surfaces were performed by SEM-EDX and data showed that main component of the coating is carbon. There were also oxygen pollution traces.

Acknowledgments: The work was partly supported by; National Research Program in Materialscience Project #1 Multifunctional materials.