SOL-GEL SYNTHESIS AND CHARACTERIZATION OF Ca1-2xMxRExMoO4 (M = Li, Na, K, Rb AND Cs; RE=Eu, Gd, Sm and Tb) POWDERS

Gytautas Janulevičius1, Artūras Žalga1

1 Department of Inorganic Chemistry, Vilnius University, Lithuania

Nowadays, considerable research attention has been devoted to trivalent lanthanide ions as luminescence centers due to the rapid development of diode lasers. Especially, phosphors excited by vacuum ultraviolet light have drawn a great amount of attention with their application in plasma display panels, and mercury-free fluorescent lamps. Besides, the search for stable, inorganic rare-earth-based red phosphor with high absorption in the near-UV/blue spectral region is an attractive and challenging research task. Moreover, nano- or micrometersized inorganic compounds activated by rare-earth ions have received much attention due to a wide application in luminescence devices, such as cathode ray tubes, field emissive display, and plasma display panels. Such applications are highly dependent on the basic factors that govern the luminescence. For instance, particle size and morphology are primarily responsible for the luminescent properties and the device performance of Ln3+-doped phosphors. For practical applications, phosphors with spherical morphology of a fine size (0.5–4 μm), which could be obtained only at relatively low temperatures, may offer dual advantages over other morphologies in that they achieve high packing densities and minimize the light scattering [1].

The optical properties of trivalent rare-earth ions either in tungstates or in molybdates with scheelite (CaWO4) or powellite (CaMoO4) structures, respectively, have been widely investigated in the last several years. Many different preparation techniques, such as traditional solid-state reactions, combustion, Czochralski method, solvothermal processes, microwave irradiation, spray pyrolysis, the facile microemulsion mediated hydrothermal process, electrochemical, sonochemical, and sol–gel synthesis are successfully used for the synthesis of different inorganic ceramic materials. Among these different synthesis routes, the solution-based synthetic methods play a crucial role in the design and production of fine ceramics and have been successful in overcoming many of the limitation of the traditional solid-state, high-temperature methods. The use of solution chemistry can eliminate major problems, such as long diffusion paths, impurities, and agglomeration, and result in products with improved homogeneity [2].

In the past few decades, many researchers have carried out the studies on the formation of metal complexes with organic ligands. Furthermore, the metal complexes with organic ligands have been used for the preparation of ceramics and metal oxide thin films by sol–gel process, using metal nitrates, chlorides, and acetates as starting materials. Besides, metal salts are very useful, inexpensive, and very easy to handle in comparison to metal alkoxides, and hence they are good alternatives for the conversion to oxides by thermal decomposition. They can be dissolved in many kinds of organic solvents in which metal complexes are formed. From this point of view, the wet synthesis route called an aqueous sol–gel method, is really attractive and compared to other techniques, as it has the advantages of a good control of the starting materials and of the processing parameters, a high purity of the raw materials, and the low temperature of the process. A good homogeneity of the product could be achieved by control of the stoichiometry of the starting solution [3].

In order to explain and better understand the possible thermal decomposition behaviour of precursors and crystallization process of the sol–gel materials, the thermal analysis (TG/DSC) of the as-prepared Ca-Mo-O nitrate-tartrate gel was performed. Besides, we report the synthesis of powelite-type Ca1-2xMxRExMoO4 compound substituted with RE3+ ions (RE = Sm, Eu, Gd and Tb) and alkaline metals (M = Li, Na, K, Rb and Cs) by aqueous sol–gel synthesis route with tartaric acid as a complexing agent. Also, the crystal phase analysis of synthesized compounds by X-ray diffraction (XRD) analysis was performed and surface morphology of annealed samples at different temperatures using scanning electron microscopy (SEM) was estimated.

Acknowledgments:

The study was funded from the European Community's SocialFoundation under grant agreement no. VP1-3.1-ŠMM-08-K-01-004/KS-120000-1756.


[1] A. Zalga, Z. Moravec, J. Pinkas, A. Kareiva, On the sol-gel preparation of different tungstates and molybdates. J Therm Anal Calorim 2011, 105, 3-11.

[2] K. Tonsuaadu, A. Zalga, A. Beganskiene, A. Kareiva, Thermoanalytical study of the YSZ precursors prepared by aqueous sol-gel synthesis route. J Therm Anal Calorim 2012, 110, 77-83.

[3] A. Zalga, R. Sazinas, E. Garskaite, A. Kareiva, T. Bareika, G. Tamulaitis, R. Juskenas, R. Ramanauskas, R.: Sol-gel synthesis of RE3+-activated CaWO4 phosphores. Chemija 2009, 20, 169-174.