Cooper indium gallium diselenide (Cu(In,Ga)Se2) thin-film solar cells are one of the most likely candidates to replace most popular silicon solar cells in the future. Characterization of Cu(In,Ga)Se2 absorbers helps to improve their efficiency and other parameters, and can be done by several methods. In this work, application of FTIR (Fourier Transform Infrared Spectroscopy) for the investigation of Cu(In, Ga)Se2 thin films is presented.
Thin film solar cells Cu(In,Ga)Se2 absorber samples were prepared by depositing about 1µm thick CIGS layer. This was done by magnetron sputtering technique with Alcatel SCM 650 magnetron sputtering device using quaternary CIGS target (Pioneer Materials, 20 cm diameter, 6,35 mm thickness, composition: Cu – 22,8%, In – 20%, Ga – 7%, Se - 50,2 %). Polished soda lime glass was used as substrate. For sample CIGS-A, substrate first was covered with approx. 1µm Mo layer, deposited from the second target in the same equipment. Afterwards, 700 nm thick CIGS layer was deposited and was annealed at about 540°C temperature. For sample CIGS-B, 920 nm thick CIGS layer was grown directly on the glass. Process parameters were the same, as in a case of other samples [1], with confirmed CIGS crystalline structure from measurements using XRD (x-ray diffraction), SEM (scanning electron microscopy) and Raman spectroscopy techniques.

FTIR measurements were performed using Nicolet 8700 FT-IR spectrometer. Measurement results are presented in Fig. 1. Several main features should be mentioned. First, clear Fabry-Perot interference indicates, that CIGS layer is transparent within the entire IR range. With more precise measurements of refractive index, this feature can be applied for thickness control. Second, increased reflectivity feature, first observed in [1] is less pronounced at 200 cm-1, probably due to less perfect crystalline structure. Also, reflectivity difference in far-IR range can be attributed to transparency of the CIGS layer and different reflection coefficients of glass and molybdenum layer.