During the last decade the solid oxide fuel cells (SOFC's) have been intensely investigated as a next generation green energy system as they exhibit high ionic conductivity, chemical and thermal stability and also have high efficiency and generate low pollution emissions [1]. Nowadays the high performance SOFC is limited to relatively high temperatures, it consists of three types of components: an electrolyte, an anode and a cathode. The electrochemical reaction involves oxygen which is reduced to oxide ions at the cathode and a fuel that is oxidized at the anode. The cathode is a perovskite-like material, the anode is a cermet (i.e., a composite material consisting of a ceramic constituent and a metal). In addition, an electrolyte used in this process is generally a doped solid ceramic oxide that eases the generation of oxygen vacancies and carries the charge between the cathode and the anode. The most widely used ceramic in SOFC is yttria stabilized zirconium (YSZ) ceramic. It is a traditional fuel cell electrolyte which exhibits the necessary ionic conductivity and low electrical resistance at high temperatures, but lacks all these properties at relatively low temperatures. Also this ceramic presents the metastable tetragonal phase which is essential for the structural hardening during cooling [2]. As a potential lower temperature replacement for YSZ electrolyte a gadolinium-doped ceria (GDC, Ce0.9Gd0.1O1.95) is considered. Ceria-based electrolytes have relatively large unit cells compared to systems based on zirconia and, as a consequence, ceria-based systems have larger channels through which oxygen ions can pass during the conduction [3-5]. Moreover, decreasing the temperature of operation for Gd doped ceria to 600 °C appears to minimize the reduction of the electrolyte; however, lower temperatures result in the greater loss of power density due to the decrease in the ionic conductivity. To address the significant problem with ceria based materials a number of approaches have been taken, such as finding the ideal doping level and ion to balance stability with adequate oxide ion conductivity, decreasing the operating temperature and improving materials processing etc [3]. The implement of these challenges could be successfully reached by using so-called solution-based synthetic methods, which play a crucial role in the design and production of fine ceramics and have been successful in overcoming many of the limitation of the traditional solid-state, high-temperature methods. For example, the metal complexes with organic ligands have been used for the preparation of ceramics and metal oxide thin films by both co-precipitation synthesis and sol-gel process, using metal nitrates, chlorides, acetates, and oxalates as starting materials.
In this study, we report the aqueous sol-gel tartaric acid assisted synthesis of Ce–Gd–O acetate–oxalate gel precursor for Ce0.9Gd0.1O1.95 ceramic. In this case, we investigated the thermal behavior of as-prepared Gd–Ce–O nitrate–tartrate precursors and their affinity to the decomposition processes of the starting materials. Moreover, the influence of the temperature, heating atmosphere, and annealing time on both the morphology and crystallinity of the Ce–Gd–O gel precursor were additionally investigated in detail using a scanning electron microscopy (SEM), X-Ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT–IR).