$Ln_2MoO_6$ (Ln= lanthanides and Y) compounds are of interests because of their potential applications in catalysis. They have been reported to crystallize in three polymorphs with monoclinic ($\alpha$), cubic ($\beta$), or tetragonal ($\gamma$) symmetries, depending on the size of Ln and the synthesis conditions [1].
The lanthanum molybdate compounds form a group of ceramic materials whose properties are dependent upon the crystalline structure and on the molybdenum valence. The phase diagram of this system exhibits several phases with La2O3-MoO3 molar ratios 1:1, 1:2, 1:3, 1:41:6, 2:1, 3:1 and 9:4. Earlier crystallographic studies of the La2MoO6 mixed oxide have shown that it crystallizes in the tetragonal structure, space group I42m (no. 121). Neutron diffraction results revealed that the crystalline structure of the La2MoO6 phase might be described as constituted by two La2O2 layers intercalated between layers of MoO4 tetrahedra. The lanthanum ions are coordinated by eight oxygen ions, whereas each molybdenum ion is fourcoordinated with oxygen ions, in the first coordination sphere [2].
Although the rare earth molybdates are important compounds for a wide range of applications, many different synthesis techniques for the preparation of such kind of materials are really desirable. For the most part, these materials are currently synthesized by solid-state reactions with the mixtures of rare earth oxides and MoO3. This process takes generally several days of heating with intermediate grindings. In this instance, high temperatures, lengthy heating process, and especially subsequent grinding damage the substance surfaces, resulting in the loss of expected of both physical and chemical properties. Besides, the volatility of MoO3 at elevated temperatures makes the synthesis of rare earth molybdates more difficult. These limitations of the traditional solid-state method motivated us to explore the searching of synthesis technique that could shorten, facilitate, and reduce the preparation way of the rare earth molybdates. In the past few decades, many researchers have carried out the studies on the formation of metal complexes with organic ligands. Furthermore, the metal complexes with organic ligands have been used for the preparation of ceramics and metal oxide thin films by a sol-gel process, using metal nitrates, chlorides, and acetates as starting materials. Besides, metal salts are very useful, inexpensive, and very easy to handle in comparison to metal alkoxides, and hence they are good alternatives for the conversion to oxides by thermal decomposition. They can be dissolved in many kinds of organic solvents in which metal complexes are formed. From this point of view, the wet synthesis route called an aqueous sol-gel method is really attractive and compared to other techniques, as it has the advantages of a good control of the starting materials and of the processing parameters, a high purity of the raw materials, and the low temperature of the process, which completely minimizes the volatility of molybdenum (VI) oxide by formation of double metal molybdates [3].
In this study the La–Bi–Mo–O nitrate–tartrate gels were prepared by an aqueous sol-gel synthesis method using tartaric acid as complexing agent. La2-xBixMoO6 mixed oxides were obtained after annealing of the initial La–Bi–Mo–O nitrate–tartrate gel precursors at 600, 800, 1000 and 1200 °C temperatures. The main purpose of this work was to obtain dense ceramic materials. The thermal decomposition behavior of the metal complexes and residue of tartaric acid was studied by thermal analysis and Fourier transform infrared spectroscopy. A surface morphology and elemental analysis were estimated by scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDX). X-ray diffraction measurements (XRD) were also performed in order to estimate the crystal phases of corresponding oxides annealed at different temperatures.