DAMMANN GRATING FOR THZ RANGE.

Karolina Wegrzynska, Martyna Rachon1, Jaroslaw Suszek1, Dmytro But2, Agnieszka Siemion1, Wojciech Knap2, Maciej Sypek1

1 Facoulty of Physics, Warsaw University of Technology, Koszykowa 75, 00-662 Warsaw, Poland

2 Charles Coulomb Laboratory, University of Montpellier 2, 34095 Montpellier, France

At the turn of the current and previous century may be noted increased interest THz range that mean range from 100GHz to 3Thz. The main reason for this ever-growing interest is the fact that the radiation in this area is non-ionizing and therefore harmless to humans, unlike the X-ray radiation. In addition, many of hazardous substances has a characteristic spectrum in this regard. Given this and the fact that it is able to penetrate through non-metallic, dry substances the amount of possible applications that we receive is enormous.

To fully exploit the potential of the THz range it is necessary to examine the possibilities of shaping the beam. Aim of this study is to investigate the performance and capabilities of separating the light emitted from the source to the specified number of beams. Such division can be achieved by using a Dammann grating [1].

This diffractive structure is not only able to create the desired array of beams, moreover, unlike the conventional diffraction grating, the beams have the same power. With such distribution, this structure can be used both in THz scanners[2], multi-point communication[3], as well as in astronomical observations and much more.

Due to the diffractive nature of the Dammann grating was easily possible to add diffractive lens in the final optical element. As the source emits diverging wave, lens gives us a wave of parallel necessary for most applications. As a result of the combination of this two structures there is possibility to eliminate the additional optical element which introduces energy loss, generate costs and require adjustment.

This type of structure can be designed with the use of Light Sword program. Presented in this poster structure was designed on the array 4096x4096, with sampling 117 μm x 117 μm. The structure was designed for the wavelength of 282 GHz (DWL 1,064 mm) and is able to divide one beam into matrix of 3 x 3 - 9 points. Focal length of lens is 495 mm.

Since many plastics are transparent to the wavelength in THz range, designed components can be easily printed on 3D printers [4] with sufficient accuracy. It is very cheap and effective way of production such diffractive structures. As a result of such a production process, they are tough, lightweight and less costly than the complex refractive structures. In this particular structure due to the very good transparency and low loss PA12 material was used.

Acknowledgments:

The authors would like to thank Orteh Company for providing LS 6.0 Software for designing and modelling diffractive optical elements and also for manufacturing investigated structures.


[1] H. Dammann and K. Goürtler, "High-efficiency in-line multiple imaging by means of multiple phase holograms," Opt. Commun. 3, 312-315 (1971).

[2] Proc. SPIE 3464, Optical Devices and Methods for Microwave/Millimeter-Wave and Frontier Applications, 95 (October 2, 1998); doi:10.1117/12.323133

[3] Journal of Reinforced Plastics and Composites (Impact Factor: 1.5). 07/2015; 34(19

[4] 3-D-printed flat optics for THz linear scanners, :IEEE Transactions on Terahertz Science and Technology, vol. 5, nr 2, 2015, 314-316