OPTICAL AND SURFACE PROPERTIES HFO2- SIO2 MIXTURE BASED UV MIRRORS

Giedrius Abromavičius1, Simonas Kičas1

1 Optical coatings laboratory, Center for Physical Sciences and Technology, Savanorių ave. 231, Vilnius LT-02300, Lithuania

Strong focus on hafnium oxide as a material for production of high power optical coatings has remained constant within optical coating community for many years [1-3]. Many extensive studies were dedicated to investigate HfO2 optical and physical properties using almost all common coating technologies like electron beam evaporation, ion plasma ion assisted deposition, beam sputtering, reactive magnetron sputtering, etc. [4-6]. Ion beam sputtering technology is considered as one of the best methods for deposition of advanced optical coatings with very complex spectral and superb optical properties. It also easily allows to produce mixtures of metal oxides with tailored optical and physical properties [7,8].

Important optical properties - absorption, reflectivity, transmittance, as well as optical resistance of formed coatings could be modified and improved using thermal annealing procedure [9]. Deposited material layers could also undergo phase transitions during such post-deposition treatment [10].

Figure 1
Fig. 1. Transmittance spectra of deposited and annealed dielectric mirrors for 266nm wavelength based on HfO2 and its mixtures with SiO2

Presented work investigates optical and surface properties of deposited and annealed dielectric mirrors for 266 nm wavelength based on selected hafnia-silica mixtures. Obtained results demonstrate that thermal annealing minimizes absorption losses and improves reflectivity of the mirrors.


[1] J. B. Oliver, S. Papernov, A. W. Schmid, J. C. Lambropoulos, Optimization of laser-damage resistance of evaporated hafnia films at 351nm, Proc. SPIE 7132, 71320J (2008).

[2] M. Alvisi, M. Di Giulio, S.G. Marrone, M.R. Perrone, M.L. Protopapa, A. Valentini and L. Vasanelli, HfO2 films with high laser damage threshold, Thin Solid Films 358, 250-258 (2000).

[3] D. Patel, P. Langston, A. Markosyan, E. M. Krous, B. Langdon, F. Furch, B. Reagan, R. Route, M.M. Fejer, J.J. Rocca and C.S. Menoni, SiO2/HfO2 multilayers: impact of process parameters and stack geometry on the optical and structural properties, Proc. of SPIE 7132, 71320L-1 (2008).

[4] R. Thielsch, A. Gatto, J. Heber, N. Kaiser, A comparative study of the UV optical and structural properties of SiO2, Al2O3, and HfO2 single layers deposited by reactive evaporation, ion-assisted deposition and plasma ion-assisted deposition, Thin Solid Films 410, 86-93 (2002).

[5] A. Hallbauer, D. Huber, G.N. Strauss, S. Schlichtherle, A. Kunz, H.K. Pulker, Overview about the optical properties and mechanical stress of different dielectric thin films produced by reactive-low-voltage-ion-plating, Thin Solid Films 516, 4587-4592 (2008).

[6] V. Pervak, F. Krausz, A. Apolonski, Hafnium oxide thin films deposited by reactive middle-frequency dual magnetron sputtering, Thin Solid Films 515, 7984-7989 (2007).

[7] A. Melninkaitis, T. Tolenis, L. Mažulė, J. Mirauskas, V. Sirutkaitis, B. Mangote, X. Fu, M. Zerrad, L. Gallais, M. Commandré, S. Kičas, and R. Drazdys, Characterization of zirconia- and niobia-silica mixture coatings produced by ion-beam sputtering, Applied Optics 50, C188-C196 (2011).

[8] M. Mende, S. Schrameyer, H. Ehlers, D.Ristau and L.Gallais, Laser damage resistance of ion-beam sputtered Sc2O3/SiO2 mixture optical coatings, Applied Optics 52, 1368-1376 (2013).

[9] C. Xu, Y. Qiang, Y. Zhu, T. Zhai, L. Guo, Y. Zhao, J. Shao, Z. Fan, Laser-induced damage threshold at different wavelengths of Ta2O5 films annealed over a wide temperature range, Vacuum 84, 1310-1314 (2010).

[10] C. Xu, Q. Xiao, J. Ma, Y. Jin, J. Shao, Z. Fan, High temperature annealing effect on structure, optical property and laser-induced damage threshold of Ta2O5 films, Applied Surface Science 254, 6554-6559 (2008).