SYNTHESIS OF GLASSY ANALOGS OF ALLUAUDITE-TYPE CATHODE MATERIALS FOR SODIUM BATTERIES

Adrianna Chamryga1, Tomasz K. Pietrzak1

1 Faculty of Physics, Warsaw University of Technology, Poland

At our faculty, a phenomenon of thermal nanocrystallization in amorphous analogs of crystalline cathode materials for lithium and sodium batteries – e. g. LiFePO4, Li3V2(PO4)3, Na3V2(PO4)3 or Na3V2(PO4)3F3 – have been studied for many years [1]. In most cases, a gigantic increase in the conductivity was observed, as a result of a proper thermal treatment of the materials. This effect was due to a growth of nanocrystallites (ca 10 nm) in a glassy matrix. Well-developed surfaces of the nanograins provide favorable conditions for electron hopping which is the mechanism of charge carrier transport in glasses containing transition metal oxides (e.g. V2O3, Fe2O3, Mn2O3).

Recently, other interesting candidates for cathode materials in sodium batteries were developed, i.e. Na2M3(PO4)3 (where M = Fe, V, Mn) with so-called alluaudite structure. Their theoretical gravimetric capacity is as high as 170 mAh/g [2]. Even though different transition metals M were tested, experimental values of gravimetric capacity reported in the literature for alluaudite-type cathode materials remain disappointing [3, 4]. Nanocrystallization of glassy analogs of alluaudites might be a solution for this issue.

In this work, we attempted to synthesize glassy samples of general composition Na2M3(PO4)3 (where M = Fe, V, Mn). Appropriate amounts of reagents – the first sample: Na2CO3 + FePO4·2H2O / FeC2O4·2H2O / V2O5 / Mn(CH3COO)2·4H2O + NH4H2PO4 – were mixed and homogenized in a mortar. The batches were put in porcelain crucibles, placed in a furnace preheated to 600 °C and melted at 1300 °C. A double crucible method was used to provide a non-oxidizing atmosphere. The melts were poured onto a stainless steel plate and immediately pressed with another one plate. In this technique – called melt-quenching – a cooling rate can be approximately 1000 °C/s.

The amorphousness of the samples was investigated with an X-ray diffractometry (XRD) using Philips X'pert Pro apparatus with copper anode and a nickel filter. The temperatures of thermal events occurring in the samples upon heating were determined from differential thermal analysis (DTA) measurements in argon flow using TA Instruments SDT Q600 apparatus.

The results presented in this poster are the first stage of our experiments, in which we expect to synthesize highly-conductive alluaudite-type nanocrystalline cathode materials for sodium batteries.


[1] T.K. Pietrzak, M. Wasiucionek, P.P. Michalski, A. Kaleta, J.E. Garbarczyk, Highly conductive cathode materials for Li-ion batteries prepared by thermal nanocrystallization of selected oxide glasses, Materials Science and Engineering B 213, 140-147 (2016).

[2] K. Trad, D. Carlier, L. Croguennec, A. Wattiaux, M.B. Amara, C. Delmas, NaMnFe2(PO4)3 Alluaudite Phase: Synthesis, Structure, and Electrochemical Properties As Positive Electrode in Lithium and Sodium Batteries, Chemistry of Materials 22, 5554-5562 (2010).

[3] W. Huang, B. Li, M.F. Saleem, X. Wu, J. Li, J. Lin, D. Xia, W. Chu, Z. Wu, Self-Assembled Alluaudite Na2Fe3-xMnx(PO4)3 Micro/Nanocompounds for Sodium-Ion Battery Electrodes: A New Insight into Their Electronic and Geometric Structure, Chemistry – A European Journal 21, 851-860 (2015).

[4] M. Wen, X. Liu, Y. Zhao, Sh. Liu, H. Liu, Y. Dong, Q. Kuang, Q. Fan, Synthesis of alluaudite-type Na2VFe2(PO4)3/C and its electrochemical performance as cathode material for sodium-ion battery, Journal of Solid State Electrochemistry (2017), available on-line.