Silicates with apatite structure are used in various fields of science and technology. In medicine the injection of silicate apatite into the structure significantly increase biocompatibility and bioactivity of materials [1]. These compounds found application as the materials for lasers, phosphors and catalysts [2,3,4]. In recent years, attracted the attention of researchers silicates of rare earth elements (REE) as promising materials for fuel cells, which are highly efficient and environmentally friendly source of electricity [5,6].
There are several methods of the synthesis of double silicates: solid-phase method, method of coprecipitation, sol-gel method and hydrothermal method. The first was the solid-phase method of synthesis. However, this process requires the high temperatures (from 1200°C up to about 1900°C) – for the synthesis of silicates without an alkali metal,so there is interest in the study of double silicates potassium and REE, which require much lower temperatures. The solid-phase synthesis was used to prepare a samples of KPr9(SiO4)6O2, KSm9(SiO4)6O2, KNd9(SiO4)6O2. The temperature of synthesis of double silicates was of 800°C, 900°C, and 1000°C. Selected temperature conditions prevented the sublimation of potassium oxide.
Silicates potassium and REE were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and infrared spectroscopy (IR).
XRD results confirmed that the structure of apatite begins to form at a baking temperature of 800°C. Calcination at 900°C, and 1000°C leads to the full interaction of all components, as a result in the presence of only the peaks of the phase on the X-ray. Further temperature increase does not cause any changes. According to electron microscopy for a samples with potassium, elements uniformly distributed over the surface of the particles, which indicates a uniformity of samples.