STRUCTURAL, OPTICAL AND ELECTRICAL CHARACTERIZATION OF InGaN LED ON SPSL BUFFER GROWN BY PULSED MOCVD

Kazimieras Badokas1, 2, Tadas Malinauskas2

1 Faculty of Physics, Vilnius University, Saulėtekio av. 9, Bld. III, LT-10222 Vilnius, Lithuania

2 Institute of Applied Research, Vilnius University, Saulėtekio av. 10, LT-10223 Vilnius, Lithuania

In recent times, nitride-based optoelectronic devices have been experiencing fast technological improvements. Blue light emitting diodes frequently use an active layer made of InGaN/GaN multiple quantum wells (MQW) [1]. However, InGaN/GaN short period superlattice structures (SPSL) have been found to further improve quality and performance of such LEDs.

The complete LED structure (Fig. 1) was grown using metalorganic chemical vapor deposition (MOCVD) technology in a close-coupled 3x2" showerhead reactor (AIXTRON). The pulsed growth regime was applied to grow quantum well in order to enhance diffusion of atoms.

Structural, optical and electrical characterization was performed using X-ray diffraction, photoluminescence and electroluminescence techniques. To study thickness and chemical composition of QWs XRD measurements were performed (Fig. 2). For PL measurements continuous wave laser (405 nm) was used as excitation source. Internal quantum efficiency (IQE) was calculated as a ratio of PL intensity at low temperature (8K) and room temperature (300K) as shown in Fig. 3. The lowest possible excitation intensity was used [2]. The external efficiency and its droop were characterized by measuring electroluminescence intensity at various injection currents (Fig. 4).

Figure 1 & 2
Fig. 1. Structure of LED.
Fig. 2. XRD diffraction (0002) 2theta/ω scan used for structural characterization.
Figure 3 & 4
Fig. 3. Photoluminescence signal dependence on temperature used for estimation of IQE.
Fig. 4. Efficiency of electroluminescence dependence on injection current.

[1] Jia C. et al., Performance improvement of GaN-based LEDs with step stage InGaN/GaN strain relief layers in GaN-based blue LEDs, Opt. Express 21, 8444-8449 (2013).

[2] Y.-L. Li, Y.-R. Huang, Y.-H. Lai, Efficiency droop behaviors of InGaN/GaN multiple-quantum well light-emitting diodes with varying quantum well thickness, Applied Physics Letters 91, 181113 (2007).