STUDY OF RADIOCESIUM AND PLUTONIUM SORPTION-DESORPTION PROCESSES APPLYING BIO- AND SYNTHETIC MATERIALS

Zita Žukauskaitė1, Benedikta Lukšienė1, Nikolaj Tarasiuk1, Evaldas Maceika1

1 State Research Institute Center for Physical Sciences and Technology, Savanorių ave. 231, LT-02300 Vilnius, Lithuania

For many years, a considerable effort has been made to develop a comprehensive understanding of the behavior of plutonium and radiocesium in the freshwater system. Studies of plutonium and cesium required analyses of many large-volume water samples for the accurate assessment of the variation in concentrations in the aquatic system. The assessment of activity concentrations of 137Cs and 239,240Pu, 238Pu in fresh water systems requires minimum 10-20 L [1] and 300-400 L [2] of water, respectively. To avoid transportation of large volumes of water samples to the laboratory and long lasting chemical treatment of these samples, we applied methods which allowed us to preconcentrate radionuclides on solid matrices. Various methods (precipitation, extraction, ion exchangeable, absorption, bioaccumulation) were used to remove radionuclides from environmental water bodies [3].

There is a big variability of materials, whose sorption capability for the removal of heavy metals and radionuclides from aqueous medium is investigated [3, 4]. Bentonite [5], mesoporous silica functionalized with copper ferrocyanide [6], zeolite, montmorillonite, aerogel, silica gel [7] and other are often used as sorbents.

The main aim of this study was to investigate some kind of bio- and synthetic materials considering them as promising alternatives to commercialized sorbents and to investigate the uptake behavior of 137Cs and 236Pu from the radionuclide-bearing fresh water under laboratory and natural conditions.

The flow method was used for studying the dynamic sorption properties of various sorbents toward Pu and Cs radionuclides by analyzing the radiocesium and plutonium distribution in the solid phase of the sorbent. The dynamic sorption characteristics are determined by measuring the activity of sorbent layers after passing definite volumes of the solution. Some laboratory and in situ desorption experiments were also carried out.

Environmental assays of moss (Ptilium crista-castrensis), lichen (Cladonia rangiferina), mushrooms (Chanterella), pine needles, raw clay and synthetic sorbents such as filter material AFA-RMP-20 and granular activated carbon were selected and used for 137Cs and 236Pu sorption from the lake water. Desorption of 137Cs and 236Pu from moss and lichen in distilled and lake water was carried out.

The sorption-desorption capacity was evaluated based on results of $\alpha$- and $\gamma$- spectrometric measurements. The raw clay as sorbent exhibited the largest sorption capacity for 236Pu (lake water, pH 6, ambient conditions). The magnitude order of sorption capacity of other sorbents for 236Pu was: moss>filter material>mushrooms>lichen>granular activated carbon>pine needles.

137Cs was significantly sorbed by the granular activated carbon. The percentage of the 137Cs desorption efficiency from moss and lichen approximately depended on the volume of water, which filled sorbents and removed 137Cs. The flowing lake water of 300 L volume through the moss column desorbs 35.6 % of 137Cs within 100 min. and desorbs 71.2 % of 137Cs within 200 min. The same moss columns as for 137Cs, showed the sorption capacity for plutonium when lake water of the 300 L volume was flowing through them.

Generalizing the obtained experimental results the following items can be pointed out. The evaluation of the initial radionuclide activity of biomaterials is required. Complex sorption-desorption process was observed when the same moss column was applied for the dynamic flow of a large lake water volume. The flowing lake water of 300 L volume caused a significant desorption of the initial 137Cs activity concentration from moss while 239,240Pu and 238Pu were sorbed in the moss matrix from the lake water.


[1] N. Tarasiuk, A. Moisejenkova, E. Koviazina et al., On the radiocesium behavior in a small humic lake (Lithuania), Nukleonika 54(3), 211-220 (2009).

[2] K. M. Wong, G.S. Brown, V. E. Noshkin, A rapid procedure for plutonium separation in large volumes of fresh and saline water by manganese dioxide coprecipitation, Journal of Rrioanalytical Chemistry 42, 7-15 (1978).

[3] Li Ping, Yin Zhuoxin, Lin Jianfeng, Jin Qiang, Du Yaofang, Fan Qiaohui, Wu Wangsuo, The immobilization of U (VI) on iron oxyhydroxides under various physicochemical conditions, Environmental Science.: Processes Impacts 16, 2278–2287 (2014).

[4] Soetaredjo F.E., Kurniawan A., Ong L. K., Widagdyo D. R., Ismadji S., Investigation of the continuous flow sorption of heavy metals in a biomass-packed column: revisiting the Thomas design model for correlation of binary component systems. RSC Adv., 4, 52856–52870 (2014).

[5] J. D. Begg, M. Zavarin, S. J. Tumey, A. B. Kersting, Plutonium sorption and desorption behavior on bentonite, Journal of Environmental Radioactivity 141, 106-114 (2015).

[6] T. Sangvanich, V. Sukwarotwatb, R. J. Wiacek et al., Selective capture of cesium and thallium from natural waters and simulated wastes with copper ferrocyanide functionalized mesoporous silica, Journal of Hazardous Materials 182, 225–231 (2010).

[7] I. S. Shaban, V. Mikulaj, Sorption-desorption of radiocesium on various sorbents in presence of humic acid, Journal of Radioanalytical and Nuclear Chemistry 208(2), 593-603 (1996).