INFLUENCE OF WO3 LAYERS GROWN BY ELECTRON-BEAM METHOD ON THE PROPERTIES OF ORGANIC LIGHT EMITTING DIODES

Julius Danišauskas1, Tomas Tolenis2, Bronė Lenkevičiūtė1, Giedrius Juška1

1 Vilnius University, Faculty of Physics, Department of Solid State Electronics

2 Center for Physical Sciences and Technology, Laboratory of Optical Coatings

Quantum dot, semiconductor Tungsten Oxide (WO3) and layers of organic materials of inverted structure hybrid quantum dots organic light emitting diodes (QD OLEDs) were vacuum deposited and spin coated onto Fluorine doped Tin Oxide (FTO) covered glass and their electrical, photoluminescence (PL) and electroluminescence (EL) features were investigated.

The structure of samples was changed by using different WO3 layer: with inclined and vertical to the substrate nanowires and by using different hole transporting layer (HTL): 4,4'-Bis(N-carbazolyl)-1,1'-biphenyl (CBP) or N,N'-Bis(3-methylphenyl)-N,N'-diphenylbenzidine (TPD).

It was found that Ir(Fppy)3 and WO3 layer with vertical nanowires cannot be used for making inverted structure QD OLEDs due to difficulty of forming quantum dot monolayer on it.

When layer of TPD was used as hole transporting layer in QD OLED it had formed a barrier for holes between Ir(Fppy)3 and TPD layers and we could not observe any EL.

In conclusion we showed that for QD OLEDs application it is better to use WO3 with inclined nanoparticles. Electroluminescence was observed in the sample with WO3 layer which had inclined nanowires and CBP hole injection layer when threshold voltage of 23 V was applied. The complete structure of this sample was - FTO/WO3'/RQD/Ir(Fppy)3/CBP/LiF/Al.