FUSED FILAMENT FARBRICATION OF BIODEGRADABLE POLYLACTIC ACID THREE-DIMENSIONAL MICROSTUCTURES

Edvinas Skliutas1, Mangirdas Malinauskas1

1 Department of Quantum Electronics, Vilnius University, Saulėtekio Ave 9, Vilnius LT-10222, Lithuania

Fused filament fabrication (FFF also known as fused deposition modeling or FDM) allows rapid and accurate materialization of computer aided design (CAD) models into real objects out of polylactic acid (PLA). This technology is simple, cheap and flexible, thus can be implemented in a wide range of applications: from rapid sculpting of new product prototypes or custom counterparts to printing of microstructured objects owning internal architecture. The later one is particularly promising for cell culturing research and tissue engineering practice.

Three-dimensional porous micro-woodpile geometry structures can be successfully applied as templates for cell proliferation [1] and further be used for tissue engineering as well as regenerative medicine applications. Tissue engineering develops biological substitutes that restore, maintain or improve tissue function or a whole organ [2]. The aim of our research was production of various porosity microstructures for restoration of hard tissue (bone) by employing commercially available low-cost 3D printer and standard material. It is known, that the pore size usually has to be within the range of 0.1-1 mm to be suitable for osteoblast cell growth. To manufacture such objects we used a widespread 3D printer (3DP) "Ultimaker Original". This device empowers fabrication of free-form shapes out of thermoplastic using FFF technology. Our chosen thermoplastic was biocompatible, biodegradable, transparent PLA. Also we applied colored (for additional functionality) and photosensitive PLA (highly luminescent under UV light).

Cell growth in the 3D microstructure woodpile depends on its microstructure and porosity. For this reason we produced various log orientation and different pore sizes micro-woodpiles. Both of these parameters corresponds to the final porosity of the object (material volume/whole structure volume). Their scanning electron (SEM) images are shown and described in Fig. 1. Be tuning the fabrication parameters such as heating nozzle temperature, flow rate, fan speed and optimizing the CAD model, we reached a result that the 3DP can reproducibly manufacture structures with up to 0.6 mm or larger pore sizes. In agreement to literature the produced micro-structures objects showed durability and flexibility in comparison to bulk PLA.

Figure 1
Fig. 1. Micro-woodpile structures. A – a 3DP woodpile with 0.8 mm pore size out of blue stained PLA. B – a 3DP woodpile with 0.6 mm pore size. C – a 3DP woodpile with 0.8 mm pore size, micro-logs are rotated 60 deg angle in respect to the ones of previous layer. A – optical image, B and C micrographs are obtained with SEM.

Samples of different types were given to the researchers from Vilnius University Institute of Biochemistry. Currently cell growth and tissue formation experiments on 3D micro-printed woodpiles are in progress. Additionally, ISO standardized mechanical characterization of microstructured PLA is being carried out [3].

In brief, our proposed approach employing tabletop 3D printer of "hobby" level enables creation of personal microfabrication laboratory at home offering production of custom made 3D structured templates of biocompatible as well as biodegradable PLA thermoplastic material. In comparison to material subtraction (milling) or lithography techniques – FFF additive manufacturing provides possibility of straightforward 100% material usage. This is highly promising to be implemented in constantly growing and emerging fields like biomedicine, Lab-on-Chip based sensing, microfluidics and integrated micromechanics.


[1] M. Malinauskas, S. Rekštytė, L. Lukoševičius, S. Butkus, E. Balčiūnas, M. Pečiukaitytė, D. Baltrukienė, V. Bukelskienė, A. Butkevičius, P. Kucevičius, V. Rutkūnas, S. Juodkazis, "3D Microporous Scaffolds Manufactured via Combination of Fused Filament Fabrication and Direct Laser Writing Ablation", Micromachines 4(5), 839–858 (2014).

[2] A. Selimis, V. Mironov, M. Farsari, "Direct laser writing: Principles and materials for 3D scaffold printing", Microelectronic engineering, 132, 83-89, (2015).

[3] D. Mizeras, E. Skliutas, L. Jonušauskas, A. Žukauskas, A. Šešok, A. Piskarskas, M. Malinauskas, "Tailoring bulk mechanical properties of 3D printed objects of polylactic acid varying internal micro-architecture", to be published (2015).