The use of nanofluids (fluids with dispersed nanoparticles in it) is an emerging technique for the enhancement of harvesting of energy in solar power plants (SPP) through increasing the thermal conductivity of heat transfer fluids [1]. In this context, it has been proved that the fabrication of gold nanoparticles in fluids commonly used in SPP like Therminol VP-1 [2] can provide an enhancement of its thermal conductivity by up to 6.5% [3], unfortunately the stability of this kind of nanofluid is poor and it can't be used in real application yet; it doesn't matter if the nanofluid is produced by chemical techniques or physical ones such as Pulsed Laser Ablation in Liquids (PLAL), the nanoparticles tend to agglomerate trough the time [4]. Nevertheless, if in PLAL method, a stabilizer like tetra-n-octylammonium bromide ((C8H17)4NBr, TOAB, > 98%) is used, is possible to obtain a stable nanofluid which keeps the thermal conductivity enhancement. In this way, gold nanoparticles were produced in Therminol VP-1 by Pulsed Laser Ablation in Liquids using as stabilizer TOAB. In particular this kind of chemical specie have demonstrated that it can be used for practical applications, insomuch as TOAB doesn't degrade at temperatures over 200°C.

The process to produce the nanofluid involves two stages, the ablation and post-fragmentation stage. A Ti:Sapphire laser that emits pulses of 30fs FWHM, with mean wavelength of 800nm, and repetition rate of 1kHz, was used as light source; the fluence for both stages was 1Jcm2. The nanoparticles produced just after the physical method promote an enhancement in the thermal conductivity of Therminol VP-1 by up to 4%; in the other hand, without the use of any stabilizer the particles reach sizes around 58.8 nm, but immediately start an agglomeration process of nanoparticles, forming in this way, nanoparticle clusters which stabilization size is 600nm. TOAB was used as stabilizer to alleviate the agglomeration phenomenon, successfully we have reach sizes around 39nm and nanoparticle cluster's size stabilization at 300nm an enhancement in the thermal conductivity of Therminol VP-1 by up to 3.6%. In contrast, the nanoparticles produced by PLAL method using TOAB as stabilizer reach a similar thermal conductivity enhancement but the stability of the nanofluid through the time is highly improved, making it more suitable for crossing the edge between research and applied technology.