CHITOSAN-CLAY-BASED COMPOSITES FOR SORPTION OF Cs, Co, Eu FROM AQUEOUS SOLUTIONS

Karolina Karalevičiūtė1, 2, Galina Lujanienė2

1 Department of Analytical and Environmental Chemistry, Faculty of Chemistry and Geosciences, Vilnius University, Lithuania

2 Department of Environmental Research, Center for Physical Sciences and Technology, Lithuania

Chitosan is the most widely used biodegradable, environmentally friendly, inexpensive and non-toxic material in nature. Chitosan is a cationic polymer that can be used in wastewater treatment to remove toxic and hazardous pollutants, heavy metals and other contaminants from water. Chitosan with characteristic functional groups such as amino and hydroxyl groups can be used as an adsorbent in water treatment by adsorption [1]. A common method to improve the mechanical and barrier properties of chitosan is to add nano-sized reinforcing elements to the chitosan chains. The use of clay as an adsorbent is due to the peculiarities of its structure and its economic availability and ubiquity [2]. Chitosan-clay composites are a very successful means of removing pollutants from water. The aim of this study was to synthesise chemically modified chitosan-clay composites and use them for the sorption of Cs+, Co2+ and Eu3+ from aqueous solutions.

In this study, chitosan powder was dissolved in 100 ml of an aqueous solution of acetic acid (1%, v/v) using a magnetic stirring plate at 90°C and 150 rpm for 1 hour, and the solution was then cooled to room temperature. Chitosan-clay nanocomposites were prepared by mixing chitosan with natural clay of local origin with a particle size of 1-4 μm and two commercially available minerals - montmorillonite K10 and zeolite. The resulting composites were chemically modified in various ways.

The composites obtained were used for the sorption of caesium, cobalt and europium. The adsorption of Cs+, Co2+ and Eu3+ on the composites was investigated as a function of pH and initial concentration [3].


[1] Ahmad N., Sultana S., Khan M.Z., Sabir S. 2020. Chitosan Based Nanocomposites as Efficient Adsorbents for Water Treatment, Modern Age Waste Water Problems: 69-83. DOI: 10.1007/978-3-030-08283-3 4.

[2] Neji A.B., Jridi M., kchaou H., Nasri M., Dhouib Sahnoun R. 2020. Preparation, characterization, mechanical and barrier properties investigation of chitosan-kaolinite nanocomposite, Polymer Testing 84(October 2019): 106380. DOI: 10.1016/j.polymertesting.2020.106380.

[3] Zhang H., et al. 2021. Sorption behavior of Eu(III) on Tamusu clay under strong ionic strength: Batch experiments and BSE/EDS analysis, Nuclear Engineering and Technology 53(1): 164–171. DOI: 10.1016/j.net.2020.06.009.