FACILE ONE-STEP HYDROTHERMAL SYNTHESIS OF NICKEL-INCORPORATED-NITROGEN-DOPED CARBON FOR DIRECTMETHANOL FUEL CELLS

Hamza Shehroz1, Farah Mumtaz1, Aldona Balčiūnaitė1, Loreta Tamašauskaitė Tamašiūnaitė1, Eugenijus Norkus1

1 Center for Physical Sciences and Technology (FTMC), Department of Catalysis, Saulėtekio ave. 3, LT10257 Vilnius, Lithuania

The urgent need to mitigate carbon emissions from conventional fuels has driven the development of efficient and low-cost energy conversion devices. Direct methanol fuel cells (DMFCs) are promising candidates due to their high energy density, potential for low-cost operation, and environmental benefits. However, their commercialization is hindered by reliance on expensive, CO-susceptible noble-metal catalysts. To address this challenge, the strategic design of non-noble multi-metallic catalysts has emerged as a critical approach. Herein, we report a facile, one-step hydrothermal synthesis method for producing a nickel-incorporated-nitrogen-doped carbon catalyst (Ni–NC) derived from nickel acetate, glucose, urea, and potassium hydroxide. The synthesized catalyst was characterized using scanning electron microscopy and X-ray diffraction. The synergistic integration of nickel species and nitrogen-doped carbon creates a multifunctional anode material exhibiting excellent methanol oxidation activity. Cyclic voltammetry measurements reveal that the Ni–NC catalyst exhibited a high current density of approximately 75 mA cm\(^{-2}\) using a 1 M KOH + 1 M CH\(_{3}\)OH solution as the electrolyte. The Ni–NC catalyst also demonstrates robust performance under varying operational conditions, maintaining current densities ranging from 66.6 to 76.3 mA cm\(^{-2}\) at scan rates ranging from 10 to 100 mV s\(^{-1}\), and achieving an optimal value of 75.15 mA cm\(^{-2}\) at a methanol concentration of 1.5 M. Furthermore, the Ni–NC anode shows remarkable stability, with negligible activity loss over 500 cycles. This study presents a highly active, durable, and cost-effective catalyst system, advancing the development of practical non-precious-metal anodes for DMFC applications.