Charge transport materials in heterojunction solar cells, particularly perovskite solar cells (PSCs), are critical for optimal charge dynamics and device stability[1][2]. Conventional hole transport materials (HTMs) such as spiro-OMeTAD and PTAA demonstrate strong photovoltaic performance due to high thin-film quality and energy alignment[3][4]. However, they often show high material cost, low carrier mobility and poor stability, which greatly limit their practical applications. In our pursuit of low-cost, accessible organic HTMs with attributes such as enhanced thermal and photochemical stability, higher glass transition temperatures, and improved hole mobility, we designed and synthesized novel dibenzothiophene and spiro[1,3-dithiolane-2,9′-fluorene]-based compounds utilizing microwave-assisted Buchwald–Hartwig reactions. Notably, surface roughness analyses of the resulting materials revealed a general average roughness of 6.129 to 8.028 nm, influencing their charge transport dynamics. The synthesized materials exhibited excellent thermal stability, with decomposition temperatures between 309 and 408 °C and glass transition temperatures ranging from 99 to 163 °C. Photoelectron emission spectroscopy indicated ionization potentials from 5.03 to 5.16 eV. Additionally, time-of-flight (TOF) and charge extraction by linearly increasing voltage (CELIV) measurements demonstrated efficient hole transport in vacuum-deposited films, achieving hole mobilities as high as 4 × 10⁻⁴ cm² V⁻¹ s⁻¹ at an electric field of 9 × 10⁵ V cm⁻¹. Among the materials evaluated, the compound 2′,7′-bis[(4-methoxyphenyl)(9-ethylcarbazol-3-yl)amino]-spiro[1,3-dithiolane-2,9′-fluorene] showcased the best device performance, attaining optimized power conversion efficiencies of 7.5% (forward scan) and 13.5% (reverse scan) under 1-sun illumination, alongside 14.55% (FW) and 26.5% (RV) under 3000 K LED illumination (1000 lx).
GLASS-FORMING HOLE-TRANSPORT MATERIALS WITH TAILORED SURFACE ROUGHNESS FOR ENHANCED PERFORMANCE IN PEROVSKITE SOLAR CELLS
Adnan Ahmed1, Naghash Miraqyan1, Asta Dabuliene1, Dmytro Volyniuk1, Edwin Pineda De La O2, Juozas Vidas Gražulevičius1, Lethy Krishnan Jagadamma2, Oleksandr Bezvikonnyi1
1 Kaunas University of Technology, Department of Polymer Chemistry and Technology, Baršausko Str. 59, Kaunas LT-51423, Lithuania
2 University of St Andrews, Energy Harvesting Research Group, School of Physics \&{
Acknowledgments: This project has received funding from the Research Council of Lithuania (LMTLT), agreement No S-MIP-24-6.
[1] X. Zhao and M. Wang, “Organic hole-transporting materials for efficient perovskite solar cells,” Mater. Today Energy, vol. 7, pp. 208–220, Mar. 2018, doi: 10.1016/j.mtener.2017.09.011.
[2] C. Zhang et al., “A review on organic hole transport materials for perovskite solar cells: Structure, composition and reliability,” Mater. Today, vol. 67, pp. 518–547, Jul. 2023, doi: 10.1016/j.mattod.2023.06.009.
[3] M. J. Choi et al., “Strategic approach for achieving high indoor efficiency of perovskite solar Cells: Frustration of charge recombination by dipole induced homogeneous charge distribution,” Chem. Eng. J., vol. 454, p. 140284, Feb. 2023, doi: 10.1016/j.cej.2022.140284.
[4] Q. Ma et al., “One-step dual-additive passivated wide-bandgap perovskites to realize 44.72%-efficient indoor photovoltaics,” Energy Environ. Sci., vol. 17, no. 5, pp. 1637–1644, 2024, doi: 10.1039/D3EE04022D.