Open Readings 2026 • P2-20
NANOSIZED CoM/rGO COMPOSITES AS AN EFFICIENT OXYGEN REDUCTION ELECTRODE MATERIAL
Ana Nastasić1, Jadranka Milikić2, Kristina Radinović2, David Tomić2, Biljana Šljukić2, 3, Aldona Balčiūnaitė4
1 Serbia, University of Belgrade, Vinča Institute of Nuclear Sciences – National Institute of the Republic of Serbia, Department of Nuclear and Plasma Physics
2 Serbia, University of Belgrade, Faculty of Physical Chemistry
3 Portugal, Universidade de Lisboa, Instituto Superior Tecnico, Chemical Engineering Department, Center of Physics and Engineering of Advanced Materials, Laboratory for Physics of Materials and Emerging Technologies
4 Lithuania, Vilnius University, Center for Physical Sciences and Technology
The oxygen reduction reaction (ORR) is a key cathodic reaction in alkaline fuel cells (AFCs) and metal-air batteries (MABs); yet its sluggish kinetics remain a major limiting factor of their performance. Although platinum-based materials exhibit high ORR activity, their high cost, scarcity and insufficient durability motivate the search for alternative materials [1-3]. In this context, earth-abundant transition metals, especially cobalt (Co), have emerged as relevant ORR electrocatalysts owing to their electronic structures and favorable interactions with ORR intermediates.
In this work, electrocatalysts based on Co combined with iron (Fe) or nickel (Ni) and supported on reduced graphene oxide (rGO) were investigated for ORR in alkaline media by linear sweep voltammetry using a rotating disc electrode. Key ORR kinetic parameters including onset potential (E\(_{onset}\)), half-wave potential (E\(_{1/2}\)) and Tafel slope (b) were determined. Both materials showed similar values of E\(_{onset}\) (0.81 V for CoNi/rGO and 0.83 V for CoFe/rGO) and E\(_{1/2}\) (0.71 V for CoNi/rGO and 0.72 V for CoFe/rGO). However, CoNi/rGO exhibited a significantly lower Tafel slope (75 mV dec\(^{-1}\)) compared to CoFe/rGO (161 mV dec\(^{-1}\)), indicating a more favorable ORR rate. In conclusion, both tested Co-based composites demonstrated good performance for ORR, making them promising, more affordable alternatives to cathode materials for AFCs and MABs.
Acknowledgments: The authors acknowledge the financial support from the Science Fund of the Republic of Serbia, grant number 250, High-performance NANosize Oxygen Electrodes: transition metals deposited ON reduced graphene oxide vs. high-entropy alloy alternatives-NANO-E-ON (Diaspora: Support for Visits of Diaspora Scientists programme). The authors would also like to thank the Ministry of Science, Technological Development, and Innovation of the Republic of Serbia for support through contracts no. 451-03-136/2025-03/200146 and 451-03-137/2025-03/200146, as well as Fundação para a Ciência e a Tecnologia (FCT, Portugal) for contracts LAPMET-LA/P/0095/2020-IST-ID and https://doi.org/10.54499/UID/04540/2025. A.N. acknowledge support provided by the Vinča Institute of Nuclear Sciences, through contract no. 451-03-136/2025-03/ 200017 with the Ministry of Science, Technological Development, and Innovation of the Republic of Serbia.
[1] J. Milikić, A. Nastasić, M. Martins, C. a. C. Sequeira, and B. Šljukić, “Air cathodes and bifunctional oxygen electrocatalysts for aqueous Metal–Air batteries,” Batteries, vol. 9, no. 8, p. 394, Jul. 2023, doi: 10.3390/batteries9080394.
[2] J. Milikić et al., “Efficient nano-size ZnM/rGO (M = Ni, Cu, and Fe) electrocatalysts for oxygen electrode reactions in alkaline media,” International Journal of Hydrogen Energy, vol. 97, pp. 247–258, Nov. 2024, doi: 10.1016/j.ijhydene.2024.11.406.
[3] K. Gočanin et al., “Advanced nitrogen-doped transition metal oxides decorated with Pt: synthesis and composition strategies for maximised electrochemical performance,” Dalton Transactions, vol. 54, no. 37, pp. 13934–13949, Jan. 2025, doi: 10.1039/d5dt01211b.