ZnCo₂O₄ spinel has emerged as a promising mixed-metal oxide for electrochemical and photoelectrochemical applications owing to its high redox activity, good electrical conductivity, and structural stability [1]. Compared to single-metal oxides, ZnCo₂O₄ exhibits enhanced charge-transfer properties and a higher density of electrochemically active sites, making it attractive for energy storage and photoelectrochemical systems. However, the functional performance of ZnCo₂O₄ strongly depends on the synthesis route and electrode fabrication strategy.
In this study, ZnCo₂O₄ was synthesized using a combustion method due to its simplicity, rapid reaction kinetics, and scalability. The precursor solution was calcined at 300 °C to remove volatile components and subsequently annealed at 600 °C to promote spinel phase formation. The synthesized material was deposited as thin-film coatings on conductive glass substrates using spray deposition, with the number of deposited layers varied to assess thickness-dependent behavior. Structural, morphological, and compositional characterization was performed using X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and Fourier-transform infrared spectroscopy. Electrochemical and photoelectrochemical properties were evaluated using standard electrochemical techniques.
X-ray diffraction confirmed the formation of phase-pure ZnCo₂O₄ spinel after high-temperature annealing, while microscopic analysis revealed porous surface morphologies favorable for ion transport and charge transfer. Electrochemical testing demonstrated a strong dependence of capacitive behavior on coating thickness. An increase in the number of deposited layers enhanced electrochemical and photoelectrochemical performance up to an optimal value, beyond which charge transport limitations were observed. The highest capacitive response and photoelectrochemical efficiency were achieved for a 16-layer ZnCo₂O₄ coating. These findings are consistent with recent reports highlighting the importance of nanostructuring and optimized film architecture in ZnCo₂O₄-based electrodes [2], as well as the growing relevance of ZnCo₂O₄ for photoelectrochemical applications [3].
The results demonstrate that combustion synthesis combined with spray deposition is an effective and scalable approach for fabricating functional ZnCo₂O₄ spinel coatings. Proper optimization of synthesis conditions and coating thickness enables enhanced electrochemical and photoelectrochemical performance, confirming the potential of ZnCo₂O₄ coatings for energy storage and photoelectrochemical applications.