THZ IMAGING SYSTEM BASED ON CW CLINOTRONS

Anna Kuleshova1, Sergiy Vlasenko2, 3, Yuriy Kovshov2, Sergiy Kishko2, Eduard Khutoryan2, Oleksiy Kuleshov2

1 Kharkiv National Medical University, II Medical Faculty, Ukraine

2 O. Ya. Usikov Institute for Radiophysics and Electronics of NAS of Ukraine, Ukraine

3 V. N. Karazin Kharkiv National University, School of Chemistry, Ukraine

Terahertz (THz) radiation possesses several unique features, including the ability to penetrate a wide range of materials while being strongly absorbed by water molecules, as well as a non-ionizing effect on inspected objects due to the very low photon energy compared to X-rays. These properties make THz sources highly promising for applications in physics, biology, medicine, plasma diagnostics, radar and remote sensing, high-data-rate communications, security systems etc. THz radiation provides novel information about substances that cannot be obtained using conventional microwave or X-ray techniques. In particular, rotational transitions of many biological molecules lie in the frequency range of 0.1–1 THz, making THz radiation attractive for medical and biological applications, where X-ray, ultrasound, optical, and magnetic resonance methods are currently employed. Owing to wavelengths shorter than 1 mm, THz imaging offers high spatial resolution and has demonstrated potential for differentiating non-melanoma skin cancers from normal tissue [1]. The THz spectral region lies between the microwave and infrared bands, where the output power of available radiation sources drops significantly, a phenomenon commonly referred to as the “THz gap.” The most powerful THz sources are gyrotrons, which can generate megawatt-level output power at frequencies up to 200 GHz, while gyrotrons operating at the second cyclotron harmonic achieve output powers of several tens of watts at frequencies around 0.8 THz [2]. However, gyrotrons require bulky and expensive superconducting magnets and offer a limited frequency tuning range. Compact THz sources can be developed based on solid-state and vacuum electron device (VED) technologies. While modern solid-state devices provide insufficient output power for many practical applications, VEDs such as backward-wave oscillators (BWOs), clinotrons, orotrons, diffraction radiation oscillators (DROs), and extended-interaction oscillators (EIOs) are widely used in the millimeter-wave range. Although EIOs can deliver watt-level output power in the sub-THz range, their frequency tuning bandwidth is typically very narrow [3]. The clinotron is a powerful modification of the BWO, originally developed at the O. Ya. Usikov Institute for Radio Physics and Electronics of the National Academy of Sciences of Ukraine (Kharkiv, Ukraine) [4]. Compact clinotrons combine wide frequency tunability with output powers of up to 1.5 W at 200 GHz and up to 100 mW at 0.4 THz [5]. Experimental investigations of the output characteristics were performed using Schottky barrier diodes and interferometers, while precise spectral measurements were carried out using high-frequency harmonic mixers and a spectrum-analyzer-equipped oscilloscope. The developed high-voltage power supply units enable stepped-frequency operation based on a PID control algorithm, which is particularly suitable for three-dimensional THz imaging applications.


[1] G.-S. Park, M. Tani, J.-S. Rieh, and S. Y. Park, Advances in terahertz source technologies. CRC Press, 2024.

[2] M. Thumm, “State-of-the-Art of High-Power Gyro-Devices: 2025 Update of Experimental results,” Journal of Infrared Millimeter and Terahertz Waves, vol. 46, no. 6, May 2025, doi: 10.1007/s10762-025-01042-y.

[3] M. Blank and K. L. Felch, “Millimeter-Wave Sources for DNP-NMR,” eMagRes, vol. 7, pp. 155-166, 2018. doi: 10.1002/9780470034590.emrstm1582.

[4] G. Ya. Levin, The Clinotron. Kiev, Ukraine: Naukova Dumka Press, 1992.

[5] S. Vlasenko et al., “Development of Compact Cherenkov Devices with Sheet Electron Beams in Sub-THz and THz Frequency Ranges (Review),” Radioelectronics and Communications Systems, vol. 67, no. 3, pp. 105–119, Mar. 2024, doi: 10.3103/s073527272403004x.