3D COATED GOLD(NICKEL, MOLYBDENUM)/TITANIUM CATALYST FOR THE GLUCOSE OXIDATION

Augustas Antanaitis1, Aldona Balčiūnaitė1, Loreta Tamašauskaitė-Tamašiūnaitė1, Eugenijus Norkus1

1 Department of Catalysis, Center for Physical Sciences and Technology, Saulėtekio Ave. 3, LT-10257, Vilnius, Lithuania

With the upcoming energy crisis in today's world, it is in the best interest to develop an alternative, renewable energy source. The glucose oxidation reaction is widely used in fuel cells because it is one of the most abundant clean fuels available from the decomposition of polysaccharides such as starch and cellulose. Also, glucose is a safe, non-toxic energy source with high chemical energy released during oxidation. Noble metals such as Pt and Au can effectively catalyze the oxidation reaction of glucose; however, Pt and Au are very expensive.

The aim of the work was to form a much cheaper and still effective catalyst for glucose oxidation reaction by electroplating 3D structure metal nickel-molybdenum (Ni-Mo) foam on a titanium plate (1 cm2) and gilding it with a low amount of gold particles. Nickel-molybdenum 3D coatings were made by electrochemical deposition on titanium plate under time and current density conditions of 50 mAcm-2 for 3 minutes and 500 mAcm-2 for another 3 minutes, from a solution that contained 0.5 M nickel and 0.01 M molybdenum ions. Gold particles were deposited on Ni-Mo foam by immersion of NiMo/Ti electrode into 1 mM HAuCl4 solution for 10 seconds. Coating surface morphology and composition were inspected using scanning electron microscopy, X-ray diffraction, energy-dispersive X-ray spectroscopy, and inductively coupled plasma optical emission spectroscopy. The cyclic voltammetry method was used to compare and evaluate the electrocatalytic activity of prepared electrodes for the glucose oxidation reaction. The cyclic voltammograms were recorded in 0.1 M NaOH and 0.01 M glucose solution in a potential range from -0.9 to 0.7 V vs. Ag/AgCl, at a potential scan rate of 50 mV s-1 and temperature of 25 °C. Research showed that the prepared 3D Au(NiMo)/Ti catalysts had higher electrocatalytic activity for glucose oxidation reaction than Ni-Mo foam.

Acknowledgments: This project has received funding from European Social Fund (project No 09.3.3-LMT-K-712-19-0138) under grant agreement with the Research Council of Lithuania (LMTLT).