SYNTHESIS AND STUDY OF PROPERTIES OF COMBINED ALGINATE/GELATIN HYDROGELS

Olha Maikovych1, Natalya Nosova1, Natalya Bukartyk1, Zoriana Nadashkevych1, Serhii Varvarenko1

1 Department of Organic Chemistry, Lviv Polytechnic National University, Ukraine

Recently the issue of new means for the treatment and protection of various wounds has attracted much attention. Along with traditional gauze, a variety of wound dressings are increasingly used. A large number of these dressings are obtained using biocompatible natural and synthetic polymers [1]. A wide range of requirements is set for polymeric materials used in medicine to obtain wound dressings, and the first selection criteria are the absence of cytotoxicity, biocompatibility, biodegradability [2,3]. To effectively treat wounds, dressings should possess high sorption activity, the ability to effectively remove excess wound exudate and its toxic components; be permeable to air and water vapor; prevent dehydration of the wound surface; prevent wound infection; to be modeled on wound surfaces with a difficult relief, and possess sufficient mechanical strength. In general, the wound dressing should provide the optimal microenvironment for wound healing in the absence of local irritants and allergic effects.

The paper presents a study of the synthesis of hydrogel material based on natural biopolymers (sodium alginate and gelatin) for medical applications. Sodium alginate and gelatin are biocompatible, non-toxic, biodegradable polymers and renewable raw materials. Gelatin is a direct functional analogue of collagen in amino acid composition. It is widely used in pharmaceuticals and medicine due to its biocompatibility, ability to biodegrade and accelerate tissue regeneration and wound healing. Alginate is known for its antibacterial properties and ability to stimulate epithelialization and development of granulation tissue in the treatment of wounds. Thus, the development of combined alginate-gelatin hydrogels is an urgent task.

In our work, combined alginate gelatin hydrogels are formed due to the formation of a hydrogel network by simultaneous cross-linking of calcium ions of sodium alginate macromolecules, gelatin, and macrochains of rarely crosslinked polyacrylic acid. The optimal synthesis conditions (reagent concentrations, the molar ratio of calcium ions to the number of carboxyl groups Ca2+/COOH-) of the combined hydrogels with satisfactory physicochemical and mechanical properties are determined.

Obtained combined hydrogels have mechanical strength 15-20 kPa depending on the hydrogel composition. Upon contact of the hydrogel with the wound, the wound fluid enters the hydrogel matrix, leading to the changes in the conformation of the polymer network and the stress of polymer chains; it can ultimately cause a decrease in strength and even the loss of structural integrity of the hydrogel. Therefore, studies of the mechanical performance of the hydrogel at uniaxial loading were performed according to the method of determining the maximum of hydrogel samples with different degrees of swelling. The obtained results suggest that alginate-gelatin hydrogels retain integrity even at maximum degrees of swelling withstanding the load only 2 times less than their initial maximum load.

The dependences of the mechanical properties of alginate-gelatin hydrogels on the degree of swelling indicate a wide range of their satisfactory performance characteristics.

An important characteristic of hydrogels as therapeutic materials is their ability to absorb wound fluid. It should be noted that too rapid absorption of wound fluid is not an advantage and, conversely, it should be avoided to prevent overdrying of the wound, as this may adversely affect the healing of wounds with the moderate release of fluids [4].

It should be noted that the amount of absorbed model exudate is in the range of 30-35 grams per 1 gram of gelforming polymers or 1900 grams per m2 of the absorption area. According to the classification given in [5], the absorption in the range of 2000–2500 g/ m2 for the period of application on the wound up to 24 hours is considered perfect for effective wound healing. Therefore, it can be assumed that the obtained alginate-gelatin hydrogel can be the basis of an effective therapeutic dressing capable of maintaining water balance by preventing both excessive dehydration of the wound and the accumulation of exudate.

The studies on sorption and release of analgesics (lidocaine and novocaine) showed long-term release of drugs and allow to predict the possibility of their prolonged delivery. In vitro cytotoxicity analysis proved the absence of a toxic effect on living cells. These results suggest that the obtained combined alginate-gelatin hydrogels are a promising material for producing hydrogel dressings for wound care.


[1] S. Schreml, R. Szeimies, L. Prantl et al., Wound healing in the 21 st century, J. Am. Acad. Dermatol., 63(5), 866-881 (2021).

[2] J.G. Powers, L.M. Morton, T.J. Phillips, Dressings for chronic wounds, Dermatol. Ther., 26(3), 197–206 (2013).

[3] F. Abasalizadeh, S. V. Moghaddam, E. Alizadeh et al., Alginate-based hydrogels as drug delivery vehicles in cancer treatment and their applications in wound dressing and 3D bioprinting, J. Bio. Eng., 14(8), (2020)

[4] Z. Peles, M. Zilberman, Novel soy protein wound dressings with controlled antibiotic release: mechanical and physical properties, Acta Biomater., 8(1), 209-217 (2012).

[5] K. Nagaraja, K. M. Rao, K. S. Rao, Alginate-based hydrogels, Plant and Algal Hydrogels for Drug Delivery and Regenerative Medicine, 11, 357-393 (2021).