COPPER NICKEL CATALYSTS MODIFIED WITH GOLD AND PLATINUM NANOPARTICLES FOR DIRECT BOROHYDRIDE FUEL CELLS

Žana Činčienė1, Aldona Balčiūnaitė1, Loreta Tamašauskaitė-Tamašiūnaitė1, Jūratė Vaičiūnienė1, Eugenijus Norkus1

1 Department of Catalysis, Center for Physical Sciences and Technology, Sauletekio Ave. 3, LT-10257, Vilnius, Lithuania, [email protected]

One of the renewable energy sources is fuel cells, which convert chemical energy directly into electricity. When developing new or improving existing fuel cells, much attention is paid to the search for new efficient catalysts that would increase the efficiency of fuel cells and enable the development of new catalyst formation technologies. As is already known, precious metal catalysts such as platinum, gold, and their alloys effectively catalyze the catalytic oxidation of sodium borohydride. Still, the cost of the catalysts is very high and a cheaper alternative is being sought.

This work aims to form efficient and inexpensive nanostructured catalysts and compare their activity with each other. Copper-nickel (Cu-Ni) foams were prepared by electrochemical deposition ($I_{\text{deposition}}$=1.5 Acm-2, $t_{\text{deposition}}$= 3, 6 and 9 min) on the titanium (Ti) surface. The electrolyte contained 0.5 M Ni2+ ions, and 0.01 M Cu2+ ions. Cu-Ni foams were additionally decorated with small amounts of gold (AuNPs) and platinum (PtNPs) nanoparticles for electrooxidation of sodium borohydride (NaBH4).

AuNPs and PtNPs were deposited on Cu-Ni foam (noted (Au(Cu-Ni)/Ti and Pt(Cu-Ni)/Ti) by it immersion in 1 mM HAuCl4 or 1 mM H2PtCl6 solution at a temperature of 25 °C for 1 min, respectively. The morphology and composition of the prepared catalysts were investigated using scanning electron microscopy, X-ray diffraction, and inductively coupled plasma optical emission spectroscopy. The electrocatalytic activity of the designed Cu-Ni foams, Au(Cu-Ni)/Ti, and Pt(Cu-Ni)/Ti catalysts was evaluated in terms of borohydride oxidation using cyclic voltammetry by recording cyclic voltammograms in a 0.05 M NaBH4 solution in an alkaline medium in the potential range from -1.2 to 0.6 V vs. Ag/AgCl at an electrode potential scan rate of 10 mV s-1.

The study showed that the prepared Au(Cu-Ni)/Ti and Pt(Cu-Ni)/Ti catalysts exhibit a higher electroactivity for borohydride oxidation in an alkaline medium than pure 3D metal Cu-Ni foam.

Acknowledgments: This project has received funding from European Social Fund (project No 09.3.3-LMT-K-712-19-0138) under grant agreement with the Research Council of Lithuania (LMTLT).