SURFACE MODIFICATION OF POLYTETRAFLUOROETHYLENE (PTFE) POLYMER BY ULTRASHORT PULSE LASER RADIATION TO IMPROVE THE SURFACE ADHESION OF CHEMICALLY DEPOSITED COPPER

Šarūnas Mickus1, Vytautas Vosylius1, Evaldas Kvietkauskas1, Viktorija Vrubliauskaitė1, Karolis Ratautas1

1 3D Technologies and Robotics Laboratory, Department of Laser Technologies, State research institute Center for Physical Sciences and Technology, Savanorių ave. 231, Vilnius LT-02300, Lithuania.

Our daily lives are packed with number of integrated, functional, and miniaturized devices. The amount of these devices is still increasing therefore high demand for fast and cheap manufacturing methods arise. One of the newer method for molded interconnect devices (MID) [1] production is Selective Surface Activation Induced by Laser (SSAIL) [2,3]. Technology copes with complex 3D surfaces and allows different materials metallization by electroless metal plating. However, several challenges related to selection of optimal surface modification parameters for different surfaces and copper adhesion strength are yet to overcome.

The work is focused on SSAIL process application on high-performance polytetrafluoroethylene (PTFE) [4] polymer as well as its impact on PTFE surface properties. Various surface roughness properties including root mean square height (Sq) and core void volume (Vvc) parameters were thoroughly researched. Sq parameter exhibited no correlation with selective copper deposition on samples whereas Vvc parameter showed a potential connection of surface texture parameter and metallization quality. The successful selective metallization window appeared on the sample areas with Vvc values between 4.75 and 7.85 μm3/μm2 (Fig. 1).

Figure 1
Fig. 1. Core Void Volume (Vvc) dependance on hatch for different laser pulse energies for chemically untreated sample. Shaded area depicts expected Vvc values for good selectiveness. Repetition rate 400 kHz.

The SSAIL method is successfully applicable on PTFE surface. The surface texture parameters correlation with selective copper deposition shows great potential for quick and easy determination of material compatibility with SSAIL process but requires further investigation.


[1] Islam, A., Hansen, H. N. & Giannekas, N. Quality investigation of miniaturized Moulded Interconnect Devices (MIDs) for hearing aid applications. CIRP Ann. 64, 539–544 (2015).

[2] Ratautas, K. et al. Laser-induced selective electroless plating on pc/abs polymer: Minimisation of thermal effects for supreme processing speed. Polymers (Basel). 12, 1–16 (2020).

[3] Ratautas, K., Jagminienė, A., Stankevičienė, I., Norkus, E. & Račiukaitis, G. Laser assisted fabrication of copper traces on dielectrics by electroless plating. Procedia CIRP 74, 367–370 (2018).

[4] Dhanumalayan, E. & Joshi, G. M. Performance properties and applications of polytetrafluoroethylene (PTFE)—a review. Adv. Compos. Hybrid Mater. 1, 247–268 (2018).