As the demand for implants keeps increasing [1], research has focused on the improvement of implant design features and biomaterials in an attempt to accelerate bone healing at early implantation times [2, 3].
Usually metals and metal alloys are used to replace load - bearing bones. Because of their chemical properties, the range of metals is narrow. Due to mechanical differences between bone and metal, after a while implant loses stability [3-5].
Silicon nitride (Si3N4) is a non-oxide ceramic that was primary used for industrial applications like internal combustion and high-temperature gas turbines. After improvements were made in its synthesis, processing and properties, Si3N4 is now one of the most extensively studied ceramics in history. It is used were extreme toughness, strength, low coefficient of friction and low wear is required and these properties are ideal for medical applications like bearing components of prosthetic hip and knee joints as it is biocompatible and have the ability to propagate human osteoblast cells in vitro [6-8]. The fact, that silicon nitride dissolves in aqueous fluids propose, means that wear particles can dissolve in vivo, which may reduce possibility of infection and increase the serving time of the implant [8].
There are many techniques used for implant coating [3]. Amongst all the techniques, plasma spraying is the most used practice, as it was approved by the Food and Drug Administration (FDA), USA for biomedical coatings. However, despite of the advantages this technique provides, it had drawbacks, like poor mechanical properties of coated hydroxyapatite [9]. Although, most of these drawbacks were addressed, other coating techniques are also utilized.
One coating technique is sol-gel dip – coating. It is inexpensive and fast technique that uses simple equipment. What is more, it allows to mass produce coating on big substrates of irregular shapes. The parameters of coating can be controlled through the sol concentration, withdrawal speed and annealing temperature [5]. Sol-gel dip-coating provides other potential advantages: high purity and homogeinity of coating, reduced thickness. On the other hand, it has it's own limitations: brittleness of the coating and high annealing temperatures [5].
In this research, we combine dip-coating of HAp, prepared by sol-gel method, with a novel substrate - silicon nitride. According to our knowledge, this combination of techniques has never been used before. All things considered: substrate properties - high strength and fracture toughness, inherent phase stability, scratch resistance, low wear, biocompatibility, hydrophilic behavior, easier radiographic imaging and resistance to bacterial biofilm formation - and the properties of coating - like excellent biocompatibility and osseointegration - should be interesting for orthopaedic applications. Coatings were prepared with or without calcium titanate sublayer. Samples were investigated using XRD, SEM, AFM and CAM methods.