RESISTIVITY AND LOW FREQUENCY NOISE CHARACTERISTICS OF EPOXY CARBON COMPOSITES

Marina Tretjak1

1 Radiophysics Department, Vilnius University, Sauletekio 9, LT10022, Vilnius, Lithuania

Composite materials with carbon nano particles are potential candidates for being used in various nanostructures and nano-devices such as nano-sized transistors and bioelectronics devices, field effect transistors, nanoscale terahertz devices, inductors, sensors, etc. [1-4]. Those versatile applications are possible due to a unique combination of structural and physical properties presented by carbon nano particles composites, e.g. one-dimensional tubular structure, desired electrical, chemical and thermal properties, fast response, vapor adsorption, UV absorption, strength, durability and flame resistance.

It is worth mentioning an advantage of carbon nanotubes (CNTs): their presumed immunity to excess electrical noise that in general tends to increase dramatically as the dimensions of the devices decrease. Carbon nanotubes behaving as covalently bonded metallic wires might be less susceptible to such fluctuations. The strong carbon-carbon bonds that form the nanotube should indeed not be prone to electro-migration or defect propagation, which are two of the most important noise mechanisms in standard metal films and wires [5, 6].

Low frequency noise spectroscopy is an informative method for investigation of the charge carrier transport and conduction mechanisms in various materials [7, 8]. On the other hand, 1/f noise is an important consideration in assessing the potential of carbon nano particles composites for electronic and sensor applications. Therefore, aim of this work was to clear up noise and electrical transport properties of composites based on epoxy resin filled with various carbon nano inclusions.

Different nano carbon particles dispersed in epoxy resin were investigated: single-walled carbon nanotubes (SWCNTs), exfoliated graphite (EG), and high surface-area carbon black (CBH) [9]. EPIKOTETM Resin 828 was used as composite matrix. It is a medium viscosity liquid epoxy produced from bisphenol A resin and epichlorhydrin. EPIKOTE 828 provides good pigment wetting and good resistance to filler settling and high mechanical and chemical resistance in the cured state. The concentration of fillers in all composites was 2 wt.% what is above the percolation threshold [9]. Resistance and low frequency (20 Hz – 20 kHz) noise characteristics have been carried out in temperature range from 73 K to 380 K.

Low frequency noise spectra of investigated materials comprises of $1/f^{\alpha}$ type components. $1/f^{\alpha}$ type fluctuations show that Mott's hopping and charge carrier capture and release processes in localized states dominate in the charge carrier transport in investigated materials. The temperature characteristic of the resistivity seconds this result: at low temperature, Mott's hopping and tunneling between conductive carbon particles dominate and percolation occurs at higher temperature. Above the polymer glass transition temperature (for SWCNT composites 292 K, for CBH composites 187 K, for EG composites 200 K) the resistivity of composites increases due to the rapid expansion of the polymer matrix what leads to the increase of the distance between conductive nanoparticles clusters and decreasing the electron tunneling current.


[1] T. Kawaharaa, S. Yamaguchia, Y. Ohnob, K. Maehashib, K. Matsumotob, S. Mizutanic, K. Itakad, Diameter dependence of 1/f noise in carbon nanotube field effect transistors using noise spectroscopy, Applied Surface Science 267, 101 (2013).

[2] B.S. Sreeja, Low-power CMOS LC QVCO using zero-biased transistor coupling of MWCNT network-based VCO structure, Microelectronics Journal 45, 196 (2014).

[3] T. Li, X. Liu, Ch. Dong, L. Yin, Single chip integration of MWCNTs/SiO2 thin film humidity sensor based on standard CMOS IC process, Microelectronic Engineering 119, 155 (2014).

[4] B. Arash, Q. Wang, Detection of gas atoms with carbon nanotubes, Scientific reports 3, 1782 (2013).

[5] P. Dutta, P. M. Horn, Low-frequency fluctuations in solids: 1/f noise, Rev. of Modern Phys. 53, 497 (1981).

[6] J. W. Eberhard, P. M. Horn, Excess 1/f noise in metals, Phys. Rev. B 18, 6681 (1978).

[7] C. Barone, G. Landi, C. Mauro, H. C. Neitzert, and S. Pagano, Universal crossover of the charge carrier fluctuation mechanism in different polymer/carbon nanotubes composites, Appl. Phys. Lett. 107, 143106, (2015).

[8] M. Arjmand, M. Mahmoodi, G. A. Gelves, S. Park, U. Sundararaj, Electrical and electromagnetic interference shielding properties of flow induced oriented carbon nanotubes in polycarbonate, Carbon 49, 3430 (2011).

[9] A. Celzard, S. F. Mareche, G. Furdin, Modelling of exfoliated graphite, Prog. Mater. Sci. 50, 93 (2005).