In the past ten years, high energy class buildings became very popular. Various methods were introduced in order to increase thermal isolation. Main approach was to implement low emission (Low-E) coating in window panes, which consists of several layers metal and metal oxide, those form tens of nanometers thick conductive layer. This layer reflects most of the infrared radiation. It was investigated that metal coating also attenuates microwaves up to ten thousand times [1], which means that mobile communication frequencies, GPS and WiFi are reflected and can't reach the user [2]. Frequency selective surfaces (FSS) were introduced as a possible solution for the reduction of metal coating microwave shielding [3]. To realize FSS, conductive layer is removed at specific places forming particular geometrical pattern which acts as a band pass filter for desirable frequency band. In the present paper we propose, in our opinion, the simpler way to reduce the shielding at WiFi frequency band by changing the thickness of glasses and the distance between them in a window pane.
Shielding effectiveness (SE) is a parameter, which shows objects ability to decrease electromagnetic wave amplitude at different frequencies. The decrease can be caused either by reflection or by absorption. SE is defined as ratio between power of incident signal and power of signal passed through the object. SE is measured in dB and is expressed in the following way:
$$SE(f) = 10 * \log\left(\frac{P_{\text{inc}}(f)}{P_{\text{glass}}(f)}\right)\tag{1}$$In our research, we used theoretical model, in order to find out how shielding effectiveness depends on longitudinal parameters. Calculations were made by using well known matching and propagation matrices theory [4]. The matching matrix was changed accordingly when the boundary conditions of the conductive surface were accounted [5]. All experiments were made by constructing double pane windows with two glasses and by varying the distance between them. Both glasses were obtained from the company Saint Gobain, they are 4 mm thick and one of them has surface conductivity of $σ = 0.094$ S. Experiments demonstrate that window panes with 16 mm gap between glasses has the largest SE of 28.5 dB at 5 GHz frequency. It is worthwhile mentioning that such a gap is mostly used in commercially available window panes. By reducing the gap to 2.5 mm, we get the minimum SE of 15.5 dB. At 2.4 GHz frequency, space between glasses has very little influence on shielding effectiveness. Standard window pane with 16 mm gap, shields by 23 dB at 2.4 GHz, while the minimum value of 20.5 dB can be reached with 9 mm gap. Good coincidence was achieved between experimental results and calculated data which proves the viability of the model used. Therefore, we used this model further for the calculation of the dependence of SE on the thickness of metalized and non-metalized glasses and gap between them, searching for the lowest possible SE at the chosen frequencies.
By using accumulated knowledge of the dependence of shielding effectiveness on the thickness of glasses, the optimal window panes were determined demonstrating the lowest SE at WiFi frequencies. The results showed that SE can be lowered by 13.5 dB at 5 GHz and 7 dB at 2.4 GHz only by changing geometry of the window panes. These results might be used in the commercial production of the Low-E window panes.