THE INFLUENCE OF GROWTH RATE AND SUBSTRATES' THERMAL EXPANSION COEFFICIENT ON PROPERTIES OF NANOCRYSTALLINE La-Sr-Mn-Co-O FILMS

Milita Vagner1, 2, Karolis Motiejuitis1, Valentina Plaušinaitienė1, 2

1 Institute of Chemistry, Faculty of Chemistry and Geosciences, Vilnius University, LT-03225 Vilnius, Lithuania

2 Department of Functional Materials and Electronucs, Center for Physical Sciences and Technology, LT-10257 Vilnius, Lithuania

Thin polycrystalline manganite-cobaltite (LSMCO) films are interesting for their magnetoresistive (MR) properties and current application as room temperature B-scalar magnetic field sensors. Further research activities were performed in order to enable application of nanostructured LSMCO films in weak magnetic field sensing. In previous research it was determined the dependence of MR and electrical properties on Co content and on intrinsic tensile strain in the LSMCO films [1]. On the other hand, the tensile strain is largely influenced by the thermal expansion coefficient of the used substrates and the thin film growth rate [2].

In the present research the strain influence on the properties of nanostructured LSMCO films is investigated. Therefore, pulsed-injection metalorganic chemical vapor deposition (PI-MOCVD) method was used for the deposition of nanostructured La0.81Sr0.19Mn1.09Co0.06O3 on substrates with different thermal expansions coefficients: polycrystalline Al2O3 (7.6 x 10-6 K-1), x-cut LiTaO3 (LTOx) (16.1 x 10-6 / K-1) and Zerodur® (0.5 x 10-6 / K-1). Furthermore, the growth rate influence was investigated by growing 400 nm thick LSMCO films at different deposition rates at the growth temperature of 600 °C.

Figure 1
Fig. 1. a) Grazing incidence diffractograms of LSMCO thin films grown on different substrates, where stars indicate characteristic reflection peaks of LSMCO; b) Characteristic (111) pole figure of polycrystalline LSMCO on Al2O3 substrate; c) Characteristic scanning electron microscope (SEM) image of nanostructured LSMCO films.

Despite the difference in thermal expansion coefficients of the substrates, all grown LSMCO films were polycrystalline (Fig. 1a). The characteristic (111) pole figure (Fig. 1b) as well as SEM images (Fig. 1c) confirmed the nanostructured behavior of LSMCO films with the average grain size below 100 nm.


[1] Vagner, M., et al. (2020). "PI-MOCVD technology of (La, Sr)(Mn, Co)O3: From epitaxial to nanostructured films." Surface and Coatings Technology 385: 125287.

[2] G. Abadias, et al. (2018). "Review article: Stress in thin films and coatings: Current status, challenges, and prospects". J. Vac. Sci. Technol. A 36: 020801.