Materials which are oxide ion conductors, characterized by high ion conductivity in (500 – 700 °C), are widely investigated for potential application in electrochemical devices such as fuel cells, gas detectors or gas-separating membranes. Polycrystalline bismuth (III) oxide, being one of such materials, is known ionic conductor, showing polymorphic phases e. g. $\alpha$, $\beta$, $\delta$, $\gamma$. Delta phase demonstrates highest conductivity in high temperature (ca. 1 S/cm at 750 °C) amongst all known oxide ion conductors. However, it is stable only in narrow temperature range (730 – 825 °C) [1].
One of the methods to obtain stable $\delta$-Bi2O3 type phase at lower temperatures can be achieved by solid solutions technique. Various metal dopands were previously applied to obtain Bi2O3-Ln2O3 systems, where Ln is rare-earth metal. One of such can be for e.g. Bi2O3-Yb2O3. Those systems, in polycrystalline form with large grains (100nm) were thoroughly investigated [2] [3]. However, morphology of those systems can be modified by e.g. various methods of synthesizing those materials. Previous research has proven that using fast cooling from liquid phase techniques, like melt-quenching or twin-rollers, may result in obtaining nanomaterials or composites, of different structural properties than their polycrystalline equivalents with bigger grains [4].

The aim of this research is to obtain a Bi2O3-Yb2O3 system with morphology that have not been previously investigated. In particular, we are interested in glass-ceramic composites, consisting of small grains (below 100nm), confined in glass matrix. Investigating as synthesized materials may allow us for better understanding of fluorite phase (schematically shown in Fig. 1) of these materials. Therefore, our idea is to apply fast-cooling techniques in order to obtain glass ceramic composites of Bi2O3-Yb2O3. X-Ray diffractometry (XRD) at room temperature (Phillips XPert Pro) was performed to investigate initial structural properties. Temperature dependent XRD measurement (Anton-Paar HTK 1200 Furnace), were conducted to observe thermal stability of as-received samples.